Assembly, Make Things Easier for Yourself

Assembly

Before beginning assembly, carefully read the following information and instructions:

Make Things Easier for Yourself!

Everything in this manual is designed to ensure that the assembly of our products can be complet- ed successfully by anyone. However, it is impor- tant to recognize that your new equipment is a sophisticated product with many small parts and consequently, the assembly process will take time. Most people find that by setting aside plenty of time, and by deciding to make the task enjoy- able, assembly will go smoothly.

¥Assembly requires two people.

¥Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

¥Tighten all parts as you assemble them, unless instructed to do otherwise.

¥For help identifying the small parts, use the PART IDENTIFICATION CHART on page 5.

¥As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.

The following tools (not included) are required for assembly:

¥ Two (2) adjustable wrenches

¥ One (1) rubber mallet

¥ One (1) standard screwdriver

¥ One (1) phillips screwdriver

¥Lubricant, such as grease or petroleum jelly plus soapy water.

Assembly will be more convenient if you have the following tools: A socket set, a set of open-end or closed-end wrenches or a set of ratchet wrenches.

1.Before assembling this product, make sure you have read and understand the information in the box above.

Place the Seat Base (50) on the floor next to the Tower Base (57), as shown in drawing 1.

See drawing 1A. Slide two 5/16Ó x 1 1/2Ó Bolts (56) through the holes in the indicated bracket on the Seat Base (50). Slide a 1/2Ó Spacer (54) onto each Bolt.

Slide the Seat Base (50) up next to the Tower Base (57), and slide the two 5/16Ó x 1 1/2Ó Bolts (56) through the indicated holes in the Tower Base.

Slide a 5/16Ó Washer (53) onto each of the 5/16Ó x 1 1/2Ó Bolts (56) and secure the Bolts with two 5/16Ó Nylon Locknuts (15). Do not tighten the Nylon

Locknuts yet.

1	57
	57
	50
1A	57	15
		15
		53
		53
	54	53
		53
56		54
	50	56
	50