Weider WEBE09140 user manual Tighten all of the M8 Nylon Locknuts 22 used in steps

8.Attach the Pull-up Bar (9) to the Uprights (3, 28) with two M10 x 50mm Screws (19) and two M10 Washers (26). Make sure the indents around the holes in the Pull-up Bar are on the side shown. Press two Rubber Endcaps (12) into the ends of the Uprights.

Tighten all of the M8 Nylon Locknuts (22) used in steps 2–8.

9.Attach the Backrest (8) to the Top Crossbar (7) with four M6 x 16mm Screws (27) and four M6 Washers (21).

10.Attach an Arm Pad (6) to a Dip Arm (5) with two M6 x 73mm Screws (18).

Repeat this step with the other Arm Pad (6).

11.Make sure that all parts have been properly tightened before the exercise rack is used.

8
		26	12
		19	9	12
		Indents		26
	3
				19
		28
9		21		27
		7		27
				21
	8
10
		6
	5
		18
				6

8