PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST on page 11 of this manual. Note: Some small parts may have been
|
| M6 x 45mm Bolt (16) |
| M10 x 25mm Bolt (25) |
|
M10 Washer (20) |
|
|
| M8 x 25mm Bolt (29) | M10 x 60mm Bolt (17) |
|
| |
M6 Washer (22) |
| M8 x 65mm Bolt (26) |
| M6 x 16mm Bolt (24) | |
|
| |
M10 Nylon Locknut (19) | M4 x 16mm Screw (28) | M10 x 60mm Carriage Bolt (18) |
| ||
M8 Nylon Locknut (27) |
| M10 x 85mm Bolt (23) |
5