Weider 15CT user manual

20. Wrap the High Cable (45) around a 90mm Pulley	20			38
(38). Attach the Pulley inside the Top Frame (8)
			26
with an M10 x 70mm Bolt (58), two M10 Washers				45
(26), two 13mm Spacers (34), and an M10 Nylon
			71
Locknut (71).
			34	34
				58
			8	26
21. Attach the eyelet end of the High Cable (45) to	21
the M10 x 20mm Bolt (67) in the bracket on the
			45
Weight Carriage (14) with an M10 Nylon Locknut
(71).
				67
			71
			14
22. Locate the Low Cable (47). Route the Cable	22
through the cage and rest it in the brackets on the
Center Base (2).
Attach a 90mm Pulley (38) inside the indicated		38
bracket on the Center Base (2) with an M10 x				71
47mm Bolt (61) and an M10 Nylon Locknut (71).
				47
	61		2
			Cage
23. Attach a 90mm Pulley (38) inside the indicated	23
bracket on the Center Base (2) with an M10 x
47mm Bolt (61) and an M10 Nylon Locknut (71).
			38
	61		71
			2
	11