Weider WESY38321 specification

40.Wrap the VKR Low Cable (72) under a 3 1/2” Pulley (78). Attach the Pulley to the indicated brack- et on the Long Base (120) with a 3/8” x 1 3/4” Bolt (93) and a 3/8” Nylon Locknut (87).

41.Route the VKR Low Cable (72) under the indicated stack of Weights (44).

Wrap the VKR Low Cable (72) under a 3 1/2” Pulley (78). Attach the Pulley to the indicated brack- et on the Long Base (120) with a 3/8” x 1 3/4” Bolt (93) and a 3/8” Nylon Locknut (87).

42.Wrap the VKR Low Cable (72) over a 3 1/2” Pulley

(78).Attach the Pulley and a Cable Trap (68) between the indicated holes in the Pulley Plates

(63)with a 3/8” x 2” Bolt (100) and a 3/8” Nylon Locknut (87). Make sure that the Cable Trap is turned to hold the Cable in the groove of the Pulley.

43.Wrap the VKR Low Cable (72) under a 3 1/2” Pulley (78). Attach the Pulley to the indicated brack- et on the Short Base (2) with a 3/8” x 1 3/4” Bolt (93) and a 3/8” Nylon Locknut (87).

	40
	78
		72
	93	87
	93
	120
	41
	44
	78	72
		72
		87
	93	120
		120
	42
	100	63
	68	87
	72	87
	72	78
		78
	43
	78
	87	72
	87
	2	93

	40
	78
		72
	93	87
	93
	120
	41
	44
	78	72
		72
		87
	93	120
		120
	42
	100	63
	68	87
	72	87
	72	78
		78
	43
	78
	87	72
	87
	2	93

	40
	78
		72
	93	87
	93
	120
	41
	44
	78	72
		72
		87
	93	120
		120
	42
	100	63
	68	87
	72	87
	72	78
		78
	43
	78
	87	72
	87
	2	93

	40
	78
		72
	93	87
	93
	120
	41
	44
	78	72
		72
		87
	93	120
		120
	42
	100	63
	68	87
	72	87
	72	78
		78
	43
	78
	87	72
	87
	2	93