Weider WESY2966.0 user manual Important Precautions

Page 3

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precautions before using the resistance system.

1.Read all instructions in this manual and all warnings on the resistance system before using the resistance system. Use the resist- ance system only as described in this manual.

2.It is the responsibility of the owner to ensure that all users of the resistance system are adequately informed of all precautions.

3.The resistance system is intended for home use only. Do not use the resistance system in any commercial, rental, or institutional setting.

4.Keep the resistance system indoors, away from moisture and dust. Place the resistance system on a level surface, with a mat beneath it to protect the floor or carpet. Make sure that there is enough clearance around the resistance system to mount, dismount, and use the resistance system.

5.Inspect and properly tighten all parts regular- ly. Replace any worn parts immediately.

6.Keep children under 12 and pets away from the resistance system at all times.

7.Keep hands and feet away from moving parts.

8.Always wear athletic shoes for foot protec- tion while exercising.

9.The resistance system is designed to sup- port a maximum user weight of 300 pounds.

10.Make sure that the cables remain on the pul- leys at all times. If the cables bind as you are exercising, stop immediately and make sure that the cables are on the pulleys. Replace all cables at least every two years.

11.The resistance system is designed to be used with the included resistance, and the resistance included with a PFMC0825 100

pound Max Pack. Do not use the resistance system with dumbbells or any other type of resistance.

12.When adding resistance, both ends of the resistance bars must rest under the two “U”- channels. Add and remove resistance bars from the “U”-channels one resistance bar at a time.

13.Keep clear of the area around the “U”-chan- nels while the resistance system is in use. Do not add or remove resistance bars from the “U”-channels while the end of the long cable is pulled out.

14.Pull on the cables only while sitting on the bench or standing on the base plate.

15.If you feel pain or dizziness at any time while exercising, stop immediately and begin cool- ing down.

16.The decal shown here has been placed on the resistance system. If the decal is missing or illegible, please call the toll-free telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

3

Image 3
Contents Mon.-Fri., 6 a.m.-6 p.m. MST QUESTIONS?Model No. WESY2966.0 Serial No Call TOLL-FREETable of Contents Important Precautions Before YOU Begin Right SideLeft Side Part Identification Chart Make Things Easier for Yourself AssemblySee the inset drawing. Attach the Crossbar Button Screws yetMake sure that the Cable is below the rod Swivel Arm Make sure that the resistance bars are cen Tered in the TrayAnce system is tipped forward as shown Page Second person hold the cable end until step Is completed. Discard the wireGrease Adjustments Adjusting the SeatAdjusting the Resistance Attaching the Pulley Housings Attaching the HandlesAttaching the Squat BAR Cable Diagram Attaching the LEG LeverLong Cable Exercise Guidelines Four Basic Types of WorkoutsPersonalizing Your Exercise Program Qty Description Part LIST-Model No. WESY2966.0Exploded Drawing A-Model No. WESY2966.0 Exploded Drawing B-Model No. WESY2966.0 R0606B Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT