Haier HWM130-0713S user manual Washing sequence

Set fill selection to

Washing sequence

Inlet selector

WASH SPIN

Wash timer

(To set to below 2 minute, first set to 6 minute then turn it back. it can increase the service life of the timer).

OFF

153

126

9

Wash selector

(Standard current, strong current)

Drain selector		Spin timer
(Do not set drain selector	(To	set to below 1 minute,
	first set to 2 minute then
on Drain position during
	turn it back. it can increase
washing)
	the service life of the timer).
		OFF
	5	1
DRAIN
	4	2
		3

WASH TIMER

WASH SELECTOR DRAIN SELECTOR SPIN TIMER

Wash

1 Inlet selector

(1)Wash side .(Figure 1)

(2 )Adjust water level rod to a position as needed.

2 Fill water and add solved powder detergent until water reaches a suitable level.(Figure 2)

It begin to wash to dispense detergent uniformly.

WASH SPIN

Figure 1

Figure 2

STRONG

3 Put in the wash load, and supplement water as necessary.

4 Select the current

Select the strength of the current according to the laundries. (Figure 3)

5 Select the washing time

Select the washing time according to the laundries. (Figure 4)

STANDARD

Figure 3

WASH SELECTOR

OFF

15 3

126

WASH TIMER	9
OFF	Figure 4

6 After washing,set the DRAIN SELECTOR
at DRAIN .(Figure 5)	DRAIN

Figure 5

DRAIN SELECTOR

8