Haier HWM130-0713S user manual Midway spinning

Page 11

Midway spinning

1.Put the laundries into the spin tub evenly and smoothly.

2.Spin

(1) Put the gland in properly.

Please put in the gland properly even if the

laundries quantity is small.

Push Gland

Push

Proper The laundries Proper No gland are slanting

(2) Close the inner and outer cover of the spin tub.

Outer cover of The spin tub

Inner cover of

The spin tub

(3) Spin for 1-2 minutes.

3.Run the foam-removing spinning.

(1)Open the outer cover of the spin tub.

(2)Set the water-filling selector control rod at the "SPIN" side. Fill water for about 1 minute.

If the water quantity filled is too large, the water may flow out from the wash tub side. Please twist the water tap to limit the water filling.

(3)Close the outer cover of the spin tub. Spin for 1-2 minutes.

WASH SPIN

9

Image 11
Contents Twin-tub Washing Machine Contents Names of the parts Meaning and description of the symbolsSafety precautions Petrol Usage of the drain hose Installation and adjustmentInstall the water inlet hose Select the water level Install the lint filterHow to change the direction of the drain hoses Pay attention to followings before washing the laundries Preparation before washingUsage of the detergent Musts in washingWash Washing sequenceMidway spinning Rinse with water-filling RinsingSpinning Disposal after washing Cleaning the lint filterDisposal of the complete unit Cleaning the overflow filterWhen the remained water is frozen Trouble-shooting Answer to questionPhenomena Reason Packing list Specification