Dryer Operating Tips

Step 2 Select Temperature

Turn the TEMPERATURE selection knob to the appropriate drying temperature. The choices are:

REGULAR – for sturdy cottons or those labeled “Tumble Dry”.

DELICATE – for heat sensitive items labeled “Tumble Dry Low” or “Tumble Dry Warm”.

Step 3 Press Start

Push this button to start the dryer. The dryer door must be shut for the dryer to operate. If the door is opened during the cycle, the start button must be pushed again to resume the cycle once the door is closed.

When the cycle is complete, a signal will sound momentarily.

Clean the

Lint Filter...

• after each load.

• to shorten drying time.

• to operate more energy efficient.

NOTE: Do not operate the dryer without the lint filter in place.

Load the Dryer Properly...

• by placing only one washload in the dryer at

a time.

•by avoiding very small loads or mixed loads.

•by adding one or more similar items to the dryer when only one or two articles need drying. This improves the tumbling action and drying efficiency.

Add A Fabric Softener Sheet...

(If So Desired)

•after loading the dryer.

•to control static cling.

•before the load becomes warm. This helps prevent greasy–looking softener stains.

•and remove any used softener sheets from the dryer to prevent greasy–looking softener stains.