Whirlpool SAWB600JQ1 manual Starting Your Washer, Water Temp Use For Hot, Warm, Cold

Page 6

Starting Your Washer

Fire Hazard

Never place items in the washer that are dampened with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on it (including cooking oils).

Doing so can result in death, explosion, or fire.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

2.(OPTIONAL STEP) Pour measured liquid chlorine bleach into the liquid chlorine bleach dispenser (on some models). Bleach will be dispensed automatically during the wash part of the cycle.

Never use more than 1 cup (250 mL) for a full load. Use less with a smaller load size.

Follow the manufacturer’s directions for safe use.

To avoid spilling, use a cup with a pouring spout. Do not let bleach splash, drip, or run down into the washer basket.

Use only liquid chlorine bleach in this dispenser.

NOTE: On models without a bleach dispenser, see “Adding Liquid Chlorine Bleach.”

3.(OPTIONAL STEP) Pour measured liquid fabric softener into the liquid fabric softener dispenser (on some models). Softener is added automatically during the rinse portion of the cycle.

Dilute liquid fabric softener by filling the dispenser with warm water until liquid reaches the crossbar in the opening.

Do not spill or drip any fabric softener on the clothes.

Use only liquid fabric softener in this dispenser.

NOTE: On models without a fabric softener dispenser, see “Adding Liquid Fabric Softener.”

4.Close the washer lid.

5.Turn the LOAD SIZE selector to the correct setting for your wash load and the type of fabric being washed.

Choose a load size that allows the load to move freely for best fabric care. See “Loading.”

You may change the load size selection after the washer has started filling by turning the selector to a different setting.

1.Measure detergent and pour it into the washer. If desired, add powdered or liquid color safe bleach. Add extra detergent for the Super Wash cycle.

Drop a sorted load of clothes loosely into your washer.

Load evenly to maintain washer balance. Mix large and small items.

Items should move easily through the wash water. Overloading can cause poor cleaning.

To reduce wrinkling of permanent press clothes and some synthetic knits, use a large load size to provide more space (see step 5).

6.Set the TEMPERATURE selector to the correct setting for the type of fabric and soils being washed. Use the warmest water safe for fabric. Follow garment label instructions.

Water Temp

Use For

 

 

Hot

Whites and pastels

111°F (44°C)

Heavy soils

or above

 

 

 

Warm

Bright colors

90°-110°F

Moderate to light soils

(32°-43°C)

 

 

 

Cold

Colors that bleed or fade

70°-90°F

Light soils

(21°-32°C)

 

 

 

6

Image 6
Contents TWO Speed Use & Care Guide3955164B Table of Contents Washer Safety Your safety and the safety of others are very importantParts and Features Additional feature your washer may haveLoading Washer USEUnderstanding Washer Cycles Normal SoundsWarm Starting Your WasherWater Temp Use For Hot ColdSelecting a Cycle and Time Rinse and SpinDrain and Spin Washer Care Troubleshooting Load too wet Agitator operationDispensers clogged or bleach leaking Load is wrinkledFor assistance or service Assistance or ServiceIf you need replacement parts Gearcase assembly covered by your warrantyWasher Warranty Whirlpool Corporation will not pay for3955164B