JVC MX-KC45 manual Even if the System is unplugged or if the power

Page 45
Select a band by pressing the FM/AM button.

 

 

 

Using the Tuner

 

 

 

CAUTION:

• In AM broadcast, reception sensitivity will be changed by

• Even if the System is unplugged or if the power

turning the AM loop antenna. Turn the AM loop antenna

failure occurs, the preset stations will be stored

for best reception.

for a few days. However, in case the preset sta-

 

 

 

tions are erased, you will need to preset the sta-

 

 

 

 

 

 

tions again.

 

 

 

English

Presetting Stations

You can preset up to 30 FM stations and up to 15 AM stations.

•Preset numbers may have been set to factory test fre- quencies prior to shipment. This is not a malfunction. You can preset the stations you want into memory by following one of the presetting methods below.

•During presetting stations, if no button operation is made for 5 seconds, the display returns to the band/frequency display. In this case, repeat steps from the beginning.

TUNING

PRESET

or or

FM=30, AM=15

When changing the Band

On the Unit

1

2 Press the 22or Ábutton to tune in a sta- tion.

3 Press the SET button.

“SET” will blink for 5 seconds.

To Change the FM Reception Mode

When you are tuned in to an FM stereo broadcast, the “ST (Ster- eo)” indicator lights up and you can hear stereo effects.

If an FM stereo broadcast is hard to receive or noisy, you can select Monaural mode. Reception improves, but you lose stereo effect.

Press the FM MODE button on the Remote Control so that the “MONO” indicator lights up on the display.

ST MONO

To restore the stereo effect, press the FM MODE button on the Remote Control so that the “MONO” indicator goes off.

4 While “SET” is blinking, press the 4or ¢ button to select the preset number.

¢: Increases the preset number by 1.

4: Decreases the preset number by 1.

5 Press the SET button.

“STORED” appears and, after 2 seconds, the display returns to the band/frequency display.

6 Repeat above steps 2 to 5 for each station you want to store in memory with a preset number.

To change the preset stations, repeat the same steps as

above.

•In step 4, you can select the preset number using the nu- meric keys on the Remote Control. See “Entering the Number with the Remote Control” on page 8.

10

Page 44 Page 46
Image 45
Page 44 Page 46
Contents MX-KC45 For U.S.A Mises en garde, précautions et indications diversesImportant for Laser Products / Important Pour Produits Laser Features IntroductionHow This Manual Is Organized Table of Contents How To Put Batteries In the Remote Control AccessoriesUsing the Remote Control Getting StartedConnecting the FM Antenna Using the Supplied Wire AntennaUsing the Coaxial Type Connector Not supplied Connecting the AM Antenna Connecting the SpeakersRear Panel of the Unit Connecting to the Wall Outlet Connecting External EquipmentDemo Mode Compu PlayECO Mode ECO Turning the Power On and OffBasic Operations Turning the System OnSelecting the Sound Mode Adjusting the VolumeEntering the Number with the Remote Control Numeric Keys Fade-out Muting Fade MutingTuning In a Station Using the TunerSelect a station using one of the following methods One Touch RadioPresetting Stations To Change the FM Reception ModeTo change the preset stations, repeat the same steps as When playing a CD-R or CD-RW Using the CD PlayerFor MP3/WMA discs More about MP3/WMA discsAbout Disc Indicator Changing the MP3/WMA Playback ModeTo Load CDs To Unload CDsTo Select a Group For MP3/WMA Group mode only Basics of Using the CD Player- Normal PlayTo Play CDs To Select a TrackProgramming the Playing Order of the Tracks Resume Play for Audio CD and MP3/WMA DiscOn the Unit only To Make a ProgramRandom Play Repeating TracksTray Lock Function Playing a Tape Using the Cassette Deck Listening to a TapeTo Fast-Wind a Tape Press 0PUSH Open gently to close the cas- sette holderThings To Know Before You Start Recording Using the Cassette Deck RecordingCD Synchro Recording Standard RecordingTape to Tape Recording DUB- Bing To Record Any Sound Source to TapeListening to the External Equipment Using an External EquipmentSetting the Clock Using the TimersPress the CLOCK/TIMER button Follow steps 2 to 5 of Setting the Clock men- tioned aboveSetting the OFF time Example PM Setting the Daily TimerSetting the on time Example AM Selecting the music sourceSetting the REC Recording Timer Setting the volume levelPress the SET button on the Unit Setting the OFF time you want the System to turn off Setting the on time you want the System to turn onSelect the preset station for recording To cancel the REC Timer temporarilyTimer Priority Setting the Sleep TimerDuring playback a source, press the Sleep button Wait for 5 secondsCare And Maintenance Symptom TroubleshootingPossible Cause ActionPage Page Specifications Systeme DE Composants Compact Mises en garde, précautions et indications diverses European Union only Union européenne seulement English Introduction Using the Cassette Deck Listening to a TapeGetting Started Connecting the FM Antenna Connecting the AM Antenna Connecting External Equipment STANDBY/ON Sound Mode Using the Tuner Even if the System is unplugged or if the power Using the CD Player Press the Disc Skip button on the Unit Place the next CD Basics of Using the CD Player Normal Play MP3/WMA Disc Resume Play for Audio CDLocked appears on the display Using the Cassette Deck Listening to a Tape REC START/STOP CD REC Start Program Dubbing Push Open Standard Recording Using an External Equipment Sleep Setting the Daily Timer Setting the REC Recording Timer Press STANDBY/ON button to turn Press the CLOCK/TIMER button until onOff the System, if necessary Insert a blank or erasable tape into the DeckSetting the Sleep Timer Care And Maintenance Dimensions 270 mm × 307 mm × 492mm W/H/D Mass Approx .3 kg 0206NYMCREBET
Top Page Image Contents