JVC MX-KC45 manual Resume Play for Audio CD, MP3/WMA Disc

Page 49

 

 

Using the CD Player

 

 

4 Select the track you want to program.

Resume Play for Audio CD and

On the Unit

MP3/WMA Disc

 

 

While the display is blinking, press the 4 or ¢ button on the

You can store the point of the track where you stopped playback.

Unit to select the track, then press the SET button within 5 seconds.

By pressing CD 6button, you can start playback again from the

The program order number will be assigned from P-1.

point where you stopped it.

 

English

On the Unit ONLY

Press the SET/RESUME button for 2 seconds until both “RESUME” and “ON” appear on the display.

To turn off the resume play, press the SET/RESUME button for 2 seconds until both “RESUME” and “OFF” appear on the display.

•To playback from the first track while resume play is acti- vated, press 7 button twice during playback.

The following operations will erase the memory of the track number that you have stopped playback when

•Pressing CD Open/Close 0 button to eject the disc.

•Pressing CD1-CD3 button or DISC SKIP button to change the disc to play.

Programming the Playing Order of the Tracks

You can program the playing order of the tracks on all the CDs. Note that you can only make a program when the CD Player is stopped.

❏You can program up to 32 tracks in any desired order including the same tracks.

For MP3/WMA discs

•If you try to select a MP3/WMA disc that has once been read or played, “MP3 DISC” or “WMA DISC” appears on the display and it can not be programmed.

•MP3/WMA disc that has not ever been read can be se- lected in a program mode. But when playback starts, “MP3 DISC” or “WMA DISC” appears on the display, the program is deleted and switched to a next program.

To Make a Program

1 Load CDs.

2 In Stop mode, set the CD Player in Program Play mode.

Press the PROGRAM button to light the “PRGM” indicator on the display.

At the same time, “PROGRAM” appears on the display.

Each time you press the button, the display changes as follows: PROGRAM =Normal display (Normal Play) =(back to the be- ginning)

•If a program is already made, the last step of the program will be displayed.

3 Press one of the Disc button (CD1-CD3) to select the CD you want to program.

The display will change to the Program Entry display.

or

Disc number Track number

Program order number

On the Remote Control

Press the numeric keys to directly enter the track number. Then, the program order number will be assigned from P-1.

•To delete the current program step, press the CANCEL button on the Unit.

5 Repeat steps 3 and 4 to program other tracks on the same CD or the other CD.

6 To play the program, Press the CD 6 but- ton.

For details, see “To Play the Program You Have Made” men- tioned below.

To confirm the programmed contents, while the CD player is stopped, select Program mode by pressing the PROGRAM but- ton and press the 4 or ¢ button on the Remote Control.

To delete all the tracks in the program, while the CD Player is stopped, press the 7 button or open the tray by pressing the CD Open/Close 0 button.

To Modify the Program, while the CD Player is stopped and the program mode is selected, press the CANCEL button, the last track in the program is deleted. To add new tracks to the end of the pro- gram, repeat above steps 3 and 4.

•If you try to program a track number that does not exists on the CD, your entry will be ignored.

•If you try to program the 33rd track, “FULL” appears on the display.

To Play the Program You Have Made

Press the CD 6 button.

The System plays the tracks in the order you have programmed them.

•To use Repeat Play for Program Play, press the REPEAT but- ton to select “REPEAT” before starting playback. For details, see “Repeating Tracks” on page 15.

❏You can skip to a particular program track by pressing the 4 or ¢ button during Program Play.

❏To stop playing, press the 7button once. If you press the 7but- ton, while the CD Player is stopped, the program is deleted.

Disc number Track number

14

Page 48 Page 50
Image 49
Page 48 Page 50
Contents MX-KC45 For U.S.A Mises en garde, précautions et indications diversesImportant for Laser Products / Important Pour Produits Laser Introduction FeaturesHow This Manual Is Organized Table of Contents How To Put Batteries In the Remote Control AccessoriesUsing the Remote Control Getting StartedUsing the Supplied Wire Antenna Connecting the FM AntennaUsing the Coaxial Type Connector Not supplied Connecting the Speakers Connecting the AM AntennaRear Panel of the Unit Connecting to the Wall Outlet Connecting External EquipmentDemo Mode Compu PlayECO Mode ECO Turning the Power On and OffBasic Operations Turning the System OnSelecting the Sound Mode Adjusting the VolumeEntering the Number with the Remote Control Numeric Keys Fade-out Muting Fade MutingTuning In a Station Using the TunerSelect a station using one of the following methods One Touch RadioTo Change the FM Reception Mode Presetting StationsTo change the preset stations, repeat the same steps as When playing a CD-R or CD-RW Using the CD PlayerFor MP3/WMA discs More about MP3/WMA discsAbout Disc Indicator Changing the MP3/WMA Playback ModeTo Load CDs To Unload CDsTo Select a Group For MP3/WMA Group mode only Basics of Using the CD Player- Normal PlayTo Play CDs To Select a TrackProgramming the Playing Order of the Tracks Resume Play for Audio CD and MP3/WMA DiscOn the Unit only To Make a ProgramRepeating Tracks Random PlayTray Lock Function Playing a Tape Using the Cassette Deck Listening to a TapeTo Fast-Wind a Tape Press 0PUSH Open gently to close the cas- sette holderThings To Know Before You Start Recording Using the Cassette Deck RecordingCD Synchro Recording Standard RecordingTape to Tape Recording DUB- Bing To Record Any Sound Source to TapeListening to the External Equipment Using an External EquipmentSetting the Clock Using the TimersPress the CLOCK/TIMER button Follow steps 2 to 5 of Setting the Clock men- tioned aboveSetting the OFF time Example PM Setting the Daily TimerSetting the on time Example AM Selecting the music sourceSetting the volume level Setting the REC Recording TimerPress the SET button on the Unit Setting the OFF time you want the System to turn off Setting the on time you want the System to turn onSelect the preset station for recording To cancel the REC Timer temporarilyTimer Priority Setting the Sleep TimerDuring playback a source, press the Sleep button Wait for 5 secondsCare And Maintenance Symptom TroubleshootingPossible Cause ActionPage Page Specifications Systeme DE Composants Compact Mises en garde, précautions et indications diverses European Union only Union européenne seulement English Introduction Using the Cassette Deck Listening to a TapeGetting Started Connecting the FM Antenna Connecting the AM Antenna Connecting External Equipment STANDBY/ON Sound Mode Using the Tuner Even if the System is unplugged or if the power Using the CD Player Press the Disc Skip button on the Unit Place the next CD Basics of Using the CD Player Normal Play MP3/WMA Disc Resume Play for Audio CDLocked appears on the display Using the Cassette Deck Listening to a Tape REC START/STOP CD REC Start Program Dubbing Push Open Standard Recording Using an External Equipment Sleep Setting the Daily Timer Setting the REC Recording Timer Press STANDBY/ON button to turn Press the CLOCK/TIMER button until onOff the System, if necessary Insert a blank or erasable tape into the DeckSetting the Sleep Timer Care And Maintenance Dimensions 270 mm × 307 mm × 492mm W/H/D Mass Approx .3 kg 0206NYMCREBET
Top Page Image Contents