* COTTON PROGRAM
| Put the laundry in to the drum. Put detergent and softener into the detergent case. | |
| Then close the door. | |
1 | • Put detergent into the main wash and prewash compartments in the detergent case. | |
Softener should be below the ‘MAX’ level. | ||
| ||
| • Put detergent into the pre wash compartment only if you want to add prewash. | |
| • When you want to use bleach, put it into the main wash compartment with detergent. | |
|
| |
2 | Press the Power button. | |
• The LED shows only | ||
|
Select the ‘Cotton’ program using program selection dial.
•If you press Start/Hold button after power button without selecting program, the ‘Cotton’ program is selected as default program.
3• Washing temperature ‘40’ ˚C, spin ‘800’ rpm and rinse ‘3’ times are selected automatically.
•If you want to change washing temperature, the spin velocity or add wash options (Rince+, Crease Care), press each button.
Press Start/Hold button.
4• The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing.
Note
•If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want.
•‘30’, ‘40’, ‘60’ and ‘95’ ˚C washing temperatures are selectable with Cotton program.
•‘Prewash’, ‘Rinse+’, and ‘Crease Care’ wash options are selectable with Cotton program.
Caution!
•If you select washing temperature ‘95’ ˚C, some cold water is supplied before the drain of main wash. This is to protect the user from the hazard of burn injury by lowering the temperature of hot wash water instead of directly draining it. Therefore this is not a malfuction.
(Be careful with the draining water, since it can be still hot although the temperature is lowered.)
12