* WOOL PROGRAM
Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door.
•Put detergent into the main wash and prewash compartments in the detergent
1case. Softener should be below the ‘MAX’ level.
•Put detergent into the pre wash compartment only if you want to add prewash.
•When you want to use bleach, put it into the main wash compartment with detergent.
2
Press the Power button.
• The LED shows only
Select the ‘Wool’ program using program selection dial.
• The LED shows ‘1:06’ and all Program Lights turn on.
3• Washing temperature ‘Cold’, spin ‘400’ rpm and rinse ‘2’ times are selected automatically.
•If you want to change the spin velocity or add wash options (Rince+, Crease Care), press each button.
Press Start/Hold button.
4• The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing.
Note
•If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want.
•Only ‘Cold’ washing temperature is selectable with Wool program.
•‘1000’ rpm of spin velocity is NOT selectable with Hand program in order to protect damage on laundry.
•Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Wool program.
•The appropriate amount of laundry for Wool program is below 1.0kg.
•Use only special detergent for wool.
(Since special neutral detergent for wool creates a lot of bubbles, use appropriate amount).
16