Defy Appliances Electrologic 920 owner manual Electrical installation, Inlet Hoses

Installation—continued

INLET HOSES

•Connect the respective inlet hoses to the hot and cold water taps and to the machine’s inlet fittings. The hot water inlet is on the left and the cold water inlet on the right.

CONNECTING THE WATER INLET HOSES

•Connect the inlet hoses to threaded hot and cold water taps and to the machine’s inlet fittings. Take care not to confuse the hot

and cold water inlets. The hot water inlet is coloured pink and the cold water inlet is coloured blue.

• If only one water tap is available, connect the inlet hose to the blue, cold water coupling.

•Open the taps and check for leaks. Re-tighten couplings if nec-

essary.

Electrical installation

•The washing machine is designed to operate on a 230 Volt, 50 Hz, 15 Amp, AC power supply.

•The machine should be connected to an earthed 3 pin wall socket.

•If the power-cord should ever need replacing, use only a genuine cord available from the nearest Defy Service Centre.

The appliance must be earthed and the manufacturer and seller do not accept responsibility for any damage due to incorrect electrical connection.

Page 5