The Door Locked symbol appears when the loading door is locked. This symbol will flash until the loading door is ready to be opened, either when programme completes or when the machine is paused. Do not force open the loading door. The Symbol will disappear when the door is ready to open. Only open the door when the symbol disappears.
5.16Changing the selections after programme has started
Switching the machine to pause mode Press the Start / Pause / Cancel button to switch the machine to pause mode. The Pause symbol appears on the display indicating that the machine is paused. The Start symbol disappears.
Changing the speed and temperature settings for auxiliary functions Depending on the step the programme has reached, you may cancel or activate the auxiliary functions; see, "Auxiliary function selection".
You may also change the speed and temperature settings; see, "Spin speed selection" and "Temperature selection".
Adding or taking out laundry
Press the Start / Pause / Cancel button to switch the machine to pause mode. The programme followup light of the relevant step during which the machine was switched into during the pause mode will flash. Wait until the Loading Door can be opened. Open the Loading Door and add or take out the laundry. Close the Loading Door. Make changes in auxiliary functions, temperature and speed settings if necessary. Press the Start / Pause / Cancel button to start the machine.
The loading door will not open if the water temperature in the machine is high or the water level is above the door opening.
5.17 Child Lock
Use the Child Lock function to prevent children from tampering with the machine, thus preventing any changes being made to a running programme.
Switch the machine on and off with the On / Off button when the Child Lock is active. When you switch the machine on again, the programme will resume from where it has stopped.
To activate the Child Lock
Press and hold the 2nd and 4th Auxiliary Function buttons for 3 seconds. “Con” appears on the display.
The same phrase will appear on the display if you press any button when Child Lock is enabled.
To deactivate the Child Lock:
Press and hold 2nd and 4th Auxiliary Function buttons for 3 seconds. “COFF” appears on the display.
Do not forget to disable the child lock at the end of the programme if it was enabled before. If the child lock is not disabled the machine will not allow you to select a new programme.
PAGE 17