Discharging the water when the machine does not have an emergency draining hose:
aPlace a large container in front of the filter to catch water from the filter.
bLoosen pump filter (anticlockwise) until water starts to flow. Fill the flowing water into the container you have placed in front of the filter. Always keep a piece of cloth handy to absorb any spilled water.
cWhen the water inside the machine is finished, take out the filter completely by turning it.
4Clean any residues inside the filter as well as fibers, if any, around the pump impeller region.
5Install the filter.
6If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one piece, seat the tabs in the lower part into their places first, and then press the upper part to close.
Indicative values for Synthetics programmes (EN)
| Load (kg) | Water Consumption (l) | Energy Consumption (kWh) | Programme Duration (min) * |
Synthetics 60 | 4 | 71 | 1.10 | 01:45 |
Synthetics 40 | 4 | 68 | 0.70 | 01:31 |
|
|
|
|
|
Remaining Moisture | Remaining Moisture |
Content (%) ** | Content (%) ** |
≤ 1000 rpm | > 1000 rpm |
45 | 40 |
45 | 40 |
|
|
*You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences may occur between the time shown on the display and the real washing time.
**Remaining moisture content values may differ according to the selected spin speed.
18 / EN | Washing Machine / User’s Manual |
|
|