Changing the Main Wash Indicator | Creda W120FW, W100FW, W120VW

CHANGING THE MAIN

WASH INDICATOR

The Main Wash Indicator has been fitted, ready to dispense ‘Powder’ detergent only.

Dispensing Liquid Detergent

1Pull drawer out until it reaches its stop.

2Press down on button to release drawer latch,

remove drawer.

3Lift ‘Powder’ indicator out of slots, rotate and

reposition for ‘Liquid’ ensuring it is secure.

Max.–	150ml.
	100ml.
	50ml.
Fig 1	Fig 2

Refer to detergent manufacturer’s instructions for dosage and

pour liquid into the compartment (Fig 1).

Note: The ‘Liquid Detergent’ Main Wash Indicator features 3 lines which represent the dosage of liquid to be used (Fig 2). We recommend that you do not exceed the maximum limit of 150ml.

Dispensing

Powder Detergent

To achieve optimum wash results we recommend that you use the detergent manufacturer’s dispensing cup to dispense no more than 300 ml of powder (Fig 3).

Fig 3

Dispensing Fabric

Conditioner

Pour fabric conditioner into compartment (Fig 4). We recommend that you do not exceed the maximum level indicated.

Fig 4

WARNING

●Do not dispense detergent tablets from the dispenser drawer. Refer to detergent manufacturer’s instructions.

Using a Dosing Ball

4Re-locate drawer and push firmly back into place.

Fig 5

To obtain claimed energy label

wash performance for a 60°C cotton wash, dispense powder detergent in a dosing ball, placed in an upright position in the centre of the wash load (Fig 5).