Hotpoint TDL52 Controls TDL54 and TVM55, Setting Delayed Start Programme Options Automatic Drying

Page 15

The Controls - TDL54 and TVM55

Heat Switch (OUT low heat, IN high heat) Alarm Switch (IN on) Drying Light Auto Light

Setting Delayed Start

Programme

Setting

Programme

Options

(i)Automatic Drying

Note:

Drying Guide

Delay Timer

Timer Control

When using the Time Delay, select the number of delay hours you require before selecting the drying time. Select the delay period by rotating the timer knob in a clockwise direction, to the number of hours delay you require. The dryer will start its programme when the time selected has elapsed.

Do not rotate the knob beyond 12 hours (maximum delay time), or past the zero stop.

If you have selected more delay than you require, turn the knob anti-clockwise to select the correct time required.

Note: Ensure that the door is closed during the time delay period.

To set the required programme, all you have to do is turn the Timer Control clockwise until the required selection appears in line with the indicator.

Never turn the Timer Control anti-clockwise.

This operation also starts the dryer, provided the door is closed, and the machine is plugged in.

1.Automatic Drying average loads ✽

2.Automatic Drying large loads ✽

3.Easy Iron Cycle.

4.Timed drying (up to 60 minutes).

5.Cool Tumble Phase.

The Auto drying programmes will automatically dry most loads to the fully dry ready to wear condition. This eliminates the need to guess the drying times and saves energy. High Heat MUST be selected (Heat switch IN).

To select Auto drying, turn the selector to position.

✽for average loads and ✽ for large loads.

✽Auto drying average loads

1to 3kg Cottons, Polycottons or Synthetics (Dry weight).

✽Auto drying large loads

3to 5kg Cottons (Dry weight).

When the door is closed the Auto Drying light will glow to indicate that Auto drying programme is running.

When the load is dry, the selector will automatically advance to the 8 minute cool tumble phase.

●If LOW heat is selected for an Auto drying programme, the dryer will advance to COOL without drying the load.

●For acrylics and acrylic mixtures, select LOW heat and use timed drying.

●Small loads (Less than 1kg) must be dried using the timed drying programme.

●Drying large loads on the ✽ average load setting will give a slightly dryer final result if required.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents TDL52 TDL54 TVM55 Contents For your safety Touching the Rear of the Dryer AS IT MAY Be HOT Electrical Requirements Fluff Filter Features Get to know the main parts of your dryerWhere to put and vent your dryer Stack it on your Washing Machine VentilationMobile Venting Fitting the Vent Hose Kit Permanent Venting Wall/Window Venting Door Release How to use your dryerAlarm on TDL54 and TVM55 onlyHousehold Items Sorting your laundryMaximum load size Typical load ClothesItems not suitable for tumble drying Wash Care LabelsItems requiring special attention Position of filter To remove the filterWithout the Filter in Position Heat Selection Never wind the timer control anti-clockwise‘Cool Tumble’ phase Controls TDL52Controls TDL54 and TVM55 Setting Delayed Start Programme Options Automatic DryingControls TDL54 and TVM55 Guide to drying times Easy Iron Programme Selected Models When to use ‘Easy Iron’ Audio SignalWhen finished After each load As necessary Lubrication Switch off electricity and remove plugCaring for your Dryer If something goes wrong If it still won’t work Page Page Key Contacts

TDL52, TVM55, TDL54 specifications

Hotpoint has established itself as a reputable brand in the appliance industry, particularly with its range of tumble dryers. Among these, the models TDL54, TVM55, and TDL52 are particularly noteworthy for their innovative features, user-friendly design, and energy efficiency.

The Hotpoint TDL54 is a vented tumble dryer known for its reliability and performance. It boasts an impressive 8 kg capacity, making it suitable for medium to large households. The TDL54 features a variety of drying programs tailored to specific fabric types, including cotton, synthetic, and delicates, ensuring optimal care for your garments. One of its standout features is the Sensor Dry technology, which automatically stops the drying cycle once the desired dryness level is reached. This not only prevents over-drying but also saves energy, making it an environmentally friendly choice.

Next, the Hotpoint TVM55 presents a slightly different approach as a vented tumble dryer. With an 8 kg capacity as well, it is designed with user convenience in mind. The TVM55 incorporates a unique Anti-Tangle feature that helps to reduce tangling of clothes during the drying process, resulting in wrinkle-free laundry. The model offers straightforward and intuitive controls, making it easy to select programs and settings, even for those not technologically inclined. Energy efficiency is another hallmark of the TVM55, making it an economical option for families looking to manage utility bills without compromising on performance.

Finally, the Hotpoint TDL52 model stands out as a compact vented tumble dryer, perfect for smaller spaces such as apartments or utility rooms. With its 6 kg capacity, it is designed for users with lighter laundry loads. However, it does not compromise on functionality; the TDL52 offers multiple drying programs to accommodate different fabric types. Additionally, it features a reverse tumble action that helps to keep clothes separated during drying, further preventing creases and ensuring a more effective drying cycle.

In summary, the Hotpoint TDL54, TVM55, and TDL52 embody the brand's commitment to developing tumble dryers that combine technology with practicality. They all feature efficient drying capabilities, user-friendly controls, and thoughtful designs, catering to diverse household needs while promoting energy efficiency and care for fabrics. Hotpoint continues to be a trusted choice for consumers seeking reliable laundry solutions.
Top Page Image Contents