Groupe SEB USA - T-FAL Turbo Pro manual Depending on the model, Our advice

Page 2

SETTING THE TEMPERATURE

2

AND THE STEAM LEVEL

 

1. Place the thermostat control

Linen

 

(H) to match the type of fabric

Cotton

 

to be ironed.

Wool

 

The light comes on (I). Wait

Silk (Viscose)

 

Synthetics

 

for the light to go off and come

 

(Acetate, Acrylic,

 

on again before you start

Polyamide,

 

ironing

 

Polyester)

 

Our advice

Start with the fabrics to be ironed on a low temperature (•) and finish with those which respond best to higher temperatures (••• or MAX)

If you iron a fabric made of a blend of fibres: set the temperature for the most delicate fibre.

2. Place the Steam Control (G) on .

The production of steam automatically adjusts to the temperature selected.

!Important

•Your iron will only produce steam when the thermostat control is in the steam zone. When first switching on the iron wait for 5 minutes after the iron is switched on for steam to be produced.

•If you lower the thermostat, wait until the light goes out and comes on again before ironing.

AUTO-STOP SAFETY FEATURE

3

(depending on the model)

The electronic system cuts the power off and the auto-stop warning light (L) flashes if the iron is left vertically on its heel for more than 8 minutes or for more than 30 seconds if left horizontal.

To restart the iron, shake it gently until the warning light stops flashing. NB. When the auto-stop safety switch operates, the thermostat light will remain off.

ANTI-DRIP FUNCTION

4

The supply of water is cut off automatically to avoid any drips from the soleplate when the temperature of the iron is too low to produce steam.

VERTICAL STEAM

1. Hang the garment up and hold the fabric taut

2. Place the thermostat control (H) on MAX, press repeatedly on the Burst of Steam button and move the iron from top to bottom.

!Important

Hold the iron a few centimetres from the garment to avoid burning delicate fabrics.

REMOVING THE STUBBORN CREASES

Press repeatedly on the Spray button to dampen the fabric.

or

Use the Burst of Steam button pressing two or three times in quick succession to obtain a more powerful burst of steam.

!Important

5

6

Never use the Burst of Steam button

on silk and

synthetics.

 

TO IRON LINEN OR COTTON WITH A HIGH

7

FLOW OF STEAM (depending on the model)

 

1.Set the thermostat control to Linen or Cotton.

2.Press the “Jeans”K( ) trigger while ironing. This increases the flow of steam.

3.Do not press the trigger for more than 30 seconds. Wait a minute before using it again.

IRONING WITHOUT STEAM

8

Place the Steam control (G) on DRY . You can start ironing when the indicator light (I) comes on for the second time.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Steam Ironing Filling the tankYour Steam Iron Water to use in your ironOur advice Depending on the modelCaring for Your Iron Self-cleaning twice a monthCleaning the Soleplate Putting Your Iron AwayWiring Instructions for U.K. only Safety PrecautionsService Centre see separate leaflet Troubleshooting

Turbo Pro specifications

Groupe SEB USA is a leading player in the small appliance market, renowned for its commitment to innovation and quality. Among its standout products is the T-FAL Turbo Pro, an exceptional steam iron designed for efficiency and effectiveness in delivering wrinkle-free clothing.

The T-FAL Turbo Pro boasts a powerful steam output, making it highly effective at tackling stubborn creases. With a robust 1,800 watts of power, this steam iron heats up rapidly, allowing users to get started on their ironing tasks promptly. Its continuous steam output reaches up to 40 grams per minute, while the steam boost function can deliver a remarkable 190 grams per minute to eliminate the toughest wrinkles in no time.

This innovative steam iron features a ceramic soleplate that ensures smooth gliding over fabrics, minimizing the risk of sticking and maximizing efficiency. The ceramic surface is also scratch-resistant, ensuring the iron remains in optimal condition over prolonged use. The precision tip of the soleplate allows for detailed ironing in hard-to-reach areas, such as around buttons and collars.

One of the key technologies found in the T-FAL Turbo Pro is the anti-drip system, which prevents water from leaking during ironing. This feature ensures that users can operate the iron at lower temperatures without worrying about any unsightly water spots on their garments. Furthermore, the vertical steam function enables users to steam hanging garments or drapes directly, adding versatility to its functionality.

Safety is paramount, and the T-FAL Turbo Pro incorporates an automatic shut-off feature, which activates when the iron is left unattended for a period. This not only adds peace of mind but also conserves energy. The iron also features an easy-fill water tank with a capacity of 10 ounces, providing ample water for extended ironing sessions.

Ergonomically designed, the T-FAL Turbo Pro offers a comfortable grip and a lightweight body, making it easy to maneuver during use. Its sleek design is complemented by a long, flexible power cord that allows for unhindered movement while ironing.

In summary, the T-FAL Turbo Pro from Groupe SEB USA combines powerful steaming capabilities with innovative features and robust design. From its rapid heat-up and high steam output to its user-friendly functionalities, this steam iron is well-equipped to handle any ironing challenge while ensuring ease of use and safety.
Top Page Image Contents