Groupe SEB USA - T-FAL Turbo Pro manual Self-cleaning twice a month, Caring for Your Iron

Page 3

CARING FOR YOUR IRON

9

Self-cleaning (twice a month)

1. Fill the tank to the MAX mark (see our recommendations on the type of water to use).

2. Put the thermostat control (H) on MAX and the steam control (G) on and switch on.

3.Place the iron on its heel and wait around 5 minutes.

4.Unplug the iron and place over the sink horizontally. Push the lock (E) backwards to free the anti-calc valve, then remove it completely.

1

5.Shake the iron gently until most water (and any impurities) has drained from the soleplate.

N.B. Once you have done this, it is normal for a little water to remain in the water tank because the iron’s anti-drip system may prevent the tank being completely emptied. This will not effect its ironing performance.

6. Replace the anti-calc valve (E).

!Note!

Your iron will only operate when the anti-calc valve is in place.

7.When the soleplate is just warm, wipe the iron with a soft cloth.

2

8.To keep the anti-calc valve working, once a month leave it to soak in white vinegar or pure lemon juice for around 2 hours. Rinse the stem with water before inserting back in the iron.

CLEANING THE SOLEPLATE

10

!Important

Unplug your iron and let it cool down before cleaning.

When the soleplate is cool, clean with a soft damp cloth or non-metallic washing up pad. Do not use detergent or descaling products. Never put the iron under the tap.

We recommend that when using starch, it should be sprayed onto the reverse side of the fabric and the soleplate cleaned more frequently. Try to avoid ironing over zips which may have rough edges.

PUTTING YOUR IRON AWAY

11

1.Set the steam control (G) on .

2.Unplug the iron.

3.Empty the tank over the sink.

4.Wind the cord loosely around the heel and fix the clip (J) onto the cord.

5.Store the iron upright on its heel. Never place it on a metallic support.

!Note

Wait until the iron has cooled down before storing it.

This appliance is designed for domestic use only.

In the case of professional use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee does not apply.

Image 3
Contents Water to use in your iron Filling the tankYour Steam Iron Steam IroningDepending on the model Our advicePutting Your Iron Away Self-cleaning twice a monthCleaning the Soleplate Caring for Your IronTroubleshooting Safety PrecautionsService Centre see separate leaflet Wiring Instructions for U.K. only

Turbo Pro specifications

Groupe SEB USA is a leading player in the small appliance market, renowned for its commitment to innovation and quality. Among its standout products is the T-FAL Turbo Pro, an exceptional steam iron designed for efficiency and effectiveness in delivering wrinkle-free clothing.

The T-FAL Turbo Pro boasts a powerful steam output, making it highly effective at tackling stubborn creases. With a robust 1,800 watts of power, this steam iron heats up rapidly, allowing users to get started on their ironing tasks promptly. Its continuous steam output reaches up to 40 grams per minute, while the steam boost function can deliver a remarkable 190 grams per minute to eliminate the toughest wrinkles in no time.

This innovative steam iron features a ceramic soleplate that ensures smooth gliding over fabrics, minimizing the risk of sticking and maximizing efficiency. The ceramic surface is also scratch-resistant, ensuring the iron remains in optimal condition over prolonged use. The precision tip of the soleplate allows for detailed ironing in hard-to-reach areas, such as around buttons and collars.

One of the key technologies found in the T-FAL Turbo Pro is the anti-drip system, which prevents water from leaking during ironing. This feature ensures that users can operate the iron at lower temperatures without worrying about any unsightly water spots on their garments. Furthermore, the vertical steam function enables users to steam hanging garments or drapes directly, adding versatility to its functionality.

Safety is paramount, and the T-FAL Turbo Pro incorporates an automatic shut-off feature, which activates when the iron is left unattended for a period. This not only adds peace of mind but also conserves energy. The iron also features an easy-fill water tank with a capacity of 10 ounces, providing ample water for extended ironing sessions.

Ergonomically designed, the T-FAL Turbo Pro offers a comfortable grip and a lightweight body, making it easy to maneuver during use. Its sleek design is complemented by a long, flexible power cord that allows for unhindered movement while ironing.

In summary, the T-FAL Turbo Pro from Groupe SEB USA combines powerful steaming capabilities with innovative features and robust design. From its rapid heat-up and high steam output to its user-friendly functionalities, this steam iron is well-equipped to handle any ironing challenge while ensuring ease of use and safety.