Electrolux 74335 manual Instructions

Operating Instructions

Problem	Possible Cause	Solution
	The height-adjustable screw	Adjust the feet according to
		installation and connection
	feet are wrongly positioned.
		instructions.
	There is very little washing in	This does not impair the
	the drum (e.g. only one
The washing machine		function.
	dressing gown).
vibrates during opera-
tion or is unstable.	The water could not be com-	Check the drain hose and
		remove any kinks if neces-
	pletely pumped out before	sary, or clean the drain pump
	spinning because
		and, if required, remove for-
	the drain hose is kinked or
		eign bodies from the pump
	the drain pump is blocked.
		housing.
		It may be necessary to
Excessive foaming dur-	Probably too much detergent	reduce the amount of deter-
		gent used. Follow the deter-
ing the main wash.	was used.
		gent manufacturer's
		recommendations.
	The screw connection on the	Tighten the inlet hose screw
	inlet hose is leaking.	connection.
	The drainage hose is leaking.	Check the drainage hose and
		replace it if necessary.
	The drain pump cover is not	Close cover correctly.
	correctly closed.
Water runs out from	Washing is caught in the	Stop the program, remove
under the washing		washing from the door, start
	door.
machine.		a new program.
		Seal the emergency drain
		hose correctly (see section
	The emergency drain hose is	“Carrying out an emergency
	not correctly sealed or is	emptying“). Call your local
	leaking.	AEG Service Force Centre if
		the emergency drain hose
		leaks.
Fabric softener was not	The conditioner insert has
washed into machine;		Clean the detergent dis-
	not been correctly positioned
drawer æ for condi-		penser drawer and attach the
	inside the conditioner com-
tioner is filled with		conditioner securely.
	partment or is blocked.
water.

30