Electrolux 74335 manual Water connection, Water pressure

Page 44

Installation and connection instructions

Water connection

3

The washing machine is provided with safety devices preventing back-

 

contamination of the water supply and complies with local water

authority requirements.

This appliance is designed to be permanently plumbed into your home’s water supply.

Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.

Important!

– Appliances for connecting to cold water must not be connected to hot water.

– Only use new hose sets for the connection.

Water pressure

The appliance is designed to operate within the following water pressure units. Minimum 1 bar (= 10N/cm2 = 0.1 Mpa), maximum 10 bar (= 100N/cm2 = 1 Mpa).

If more than 10 bar: Install a pressure-reduction valve upstream

If less than 1 bar: Unscrew the inlet hose from the appliance at the inlet solenoid valve and remove the flow regulator (to do this, remove the filter with needle nose pliers and remove the rubber washer behind the filter). Replace the filter.

44

Image 44
Contents ÖKO-LAVAMAT 74335 update Dear Customer Contents What to do if Installation Safety PrecautionsSeparate spin Contents Intended Use SafetyPrior to initial start-up Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingDetergent dispenser drawer Description of the ApplianceFront view Control panel Program selectorWool P hand wash Program option buttons Load Water Energy Time What does Update mean?Consumption data and wash times Before the First Wash Preparing a Wash LoadSorting and preparing a wash load Pull the detergent dispenser drawer out slightlyWashing Types and Care Symbols Water hardness details How much detergent and conditioner?Water softening Brief instructions When the washing program has endedRunning a washing cycle Setting the Washing Program Changing the spin speed/Selecting Rinse HoldDoor Indicator Display START/PAUSE Opening and closing the doorLoading the washing See Program Tables for maximum loadsIf using liquid detergent / tablets Add detergent / conditionerCompartment for pre-wash/soaking detergent Or for water softening agentProgram progress display Starting the Washing ProgramWashing Program Progress Change the washing program Changing or stopping the wash programSelecting the program options Changing the Spin SpeedWashing cycle is complete/Removing the washing Program tables WashingType of washing Max. Load Program selector Dry weight Separate conditioning/starchingSeparate rinse Separate spinMaintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorCleaning the drain pump Before cleaning the drain pumpPump Gency emptyingWhat to do if Trouble ShootingProblem Possible Cause Solution Instructions Follow instructions for Washing is heavily Open the water tap fully If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingPull it out Carrying out an emergency emptyingHave a flat container on hand to catch the water When the water is completely drained Setting the additional rinse functionCancelling the additional rinse function Additional Rinse RINSE+Cancelling the child safety feature Child Safety FeatureSetting the child safety feature Installation and Connection Instructions Installation Safety PrecautionsRemove transport packaging Installation of the applianceTransporting the appliance Installation and connection instructions Special spanner E Installation-Site preparation Installation on a Suspended FloorLevelling the appliance Earth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Great Britain Guarantee ConditionsEuropean Guarantee Index Service & Spare Parts 0870 5 929 Help us to help youPNC Customer Care