Operating sequence
Before the first wash we recommend that you pour 2 litres of water into the main wash compartment 
of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time, shaking them out as much as possible.
Close the door.
P0004
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the
main wash compartment 
.
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked 
.
4. Select the desired option(s)
Depress one or more buttons depending on the selected programme.
Spin | Quick | Rinse |
Suppress. | Half | Hold |
5. Select the temperature
Turn the dial to the required setting.
95 |
M0045 |
6.Select the programme and start the machine
Turn the programme selector dial clockwise to the required programme and press the
ENGLISH
3. Measure out the additive
If required, pour fabric softener into the compartment marked 
, without exceeding the «MAX» mark.
B |
C0070 |
C0071 |
M0046 |
P0080S
11