Electrolux EHG 7822, EHG 7812 manual Installation

Page 9

electrolux 9

INSTALLATION

Any gas installation must be carried out by a registered competent person, and in accordance with existing rules and regulations.

The relevant instructions are to be found in the second section of this manual.

Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown.

WHEN THE HOB IS FIRST INSTALLED

Once the hob has been installed, it is important to remove any protective materials, which were put on in the factory.

The manufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this book be ignored.

Image 9
Contents Instruction booklet Electrolux Welcome to the world of Electrolux Contents Installation Important Safety InformationChild Safety During UseService ∀ Environmental Information Description of the Hob Installation Hob burners control knobs OperationLighting the burners Only for model EHGBurner Minimum Maximum Diameter Using the hob correctlyMaintenance and Cleaning Hob TopPan Supports Ignition electrode BurnersSomething Not Working? SymptomEngineer technical data Instructions for the InstallerType of GAS Location Important safety requirementsInstallation Gas Connection Cut Out Size Building Building over a cupboard or drawerBuilding over a kitchen unit with door Fitting the Hob into the Worktop This HOB Must be Earthed Electrical ConnectionsPermanent Connection Wiring Diagram Preliminary Electrical Systems Check Fault FindingEarth Continuity Check Ignition System / Gas Ignition Procedure Pressure TestingMinimum adjustment CommissioningMethod Conversion from Natural Gas to LPGExclusions Standard Guarantee Conditions0870 5 929 Service and Spare PartsEuropean Guarantee Electrolux Electrolux 35693-2001