Electrolux LAVAMAT 62820 manual Water inlet, 35m long pressure hose is supplied with the appliance

Page 32

Water inlet

A 1.35m long pressure hose is supplied with the appliance.

If a longer inlet hose is required, only hoses from the manufacturer are to be used. Your local Service Force stocks hose kits of different lengths.

3 Sealing rings are either inserted in the plastic nuts of the threaded hose fitting or are included as spare parts. Do not use any other sealing rings.

Important! All threaded hose fit- tings must only be tightened by hand.

1.Connect the hose with the right-an-

gle connector to the machine.

Important! Do not position the inlet hose vertically downwards. Position it to the right or the left as shown in the illustration.

2.Connect the hose with the straight

connector to a water tap with an R ¾ (inch) screw thread.

3. Slowly turn on the tap and check that all connections are watertight.

Image 32

Contents Lavamat Following symbols are used in the text Dear CustomerContents Safety information concerning installation Electrical ConnectionSafety Prior to using the appliance for the first timeChild safety Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardDescription of the appliance Control panelProgramme overview Application/Features Care Symbols1 Programme for easy-care mixed fibres and syntheticsBefore the first wash Preparing and sorting washingPreparing washing Sorting washingDoor indicator Running a wash cycleOpening the door/loading washing Adding detergent /conditionerIf you are using liquid detergent Washing powder/tablets for the main wash cycleSwitching on the appliance/selecting a programme Changing the spin speed/selecting rinse holdSelecting additional programmes Shortened wash programme for lightly soiled itemsStarting a programme Programme sequenceInterrupting a programme/adding washing Interrupting a programmeEnd of the wash cycle/removing the washing If Rinse Hold has been selectedChild safety device Deactivating the child safety deviceCleaning and care Detergent drawerWashing drum Door and rubber collarWhat to do if Remedying small faults yourselfProblem Possible cause Remedy E10 appears Tap is shut off Turn on the tap END indicator is Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washing When the water has all drained awayCarrying out an emergency drain Drain pump Old appliance DisposalPackaging material Consumption values Technical dataProgramme selector Load size Water Energy Temperature Safety information concerning installation This washing machine cannot be built-inInstalling the appliance When using a sack trolley to transport the washing machineTransporting the appliance Removing the transit packagingWhere to install Making the appliance level If the appliance is to stand on a baseBrown Live Wire coloured green and yellow Electrical ConnectionPermitted water pressure Connecting the appliance to the water supplyPermanent Connection Water inlet 35m long pressure hose is supplied with the applianceFor drainage into an outlet From your Service Force CentreWater Drainage Pumping heights of over 1 metre Warranty conditions Great BritainFurther after-sales service agencies overseas Autres agences étrangères assurant le service après-venteWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroCustomer Service Centres Hungary For Customer Service in the Republic 0870 5 929Customer Care For general enquiries concerningAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG