Electrolux L 75478 FL Setting and Starting a Programme, Interrupt a Programme, Cancel a Programme

Page 15

ENGLISH 15

5.Measure out the detergent and the fabric conditioner.

6.Carefully close the detergent dis- penser. Make sure that the flap does not cause a blockage when you close the drawer.

4.To use liquid detergent, turn the flap down.

With the flap in the position

DOWN:

Do not use gelatinous or thick liquid detergents.

Do not put more liquid deter- gent than the limit showed in the flap.

Do not set the prewash phase.

Do not set the delay start function.

SETTING AND STARTING A PROGRAMME

1.Turn the programme knob. The re- lated programme indicator comes on.

2.The indicator of button 4 flashes with red colour.

3.The display shows the default tem- perature and spin speed. To change the temperature and/or the spin speed, press the related buttons.

4.Set the available functions. The indi- cator of the set function comes on or the display shows the related symbol.

5.Press button 4 to start the pro-

gramme. The indicator of button 4 is on.

INTERRUPT A PROGRAMME

1.Press button 4 . The indicator flashes.

CANCEL A PROGRAMME

1.Press button 1 to cancel the pro- gramme and to deactivate the ap- pliance.

2.Press button 1 again to activate the appliance. Now, you can set a new washing programme.

The appliance does not drain the water.

CHANGE A FUNCTION

You can change only some functions before they operate.

1.Press button 4 . The indicator flashes.

2.Change the function set.

SET THE DELAY START

2.Press button 4 again. The washing programme continues.

1.Press button 5 again and again until the display shows the number of minutes or hours. The related symbols comes on.

Image 15
Contents FL L 75678 FL Service ContentsAccessories and Consumables For Perfect ResultsVisit OUR Website for Care and Cleaning Safety InformationChild Safety Device General SafetyEcological Hints Environment ConcernsDiscard the Appliance Packaging MaterialsProduct Description Programme Knob AccessoriesControl Panel ON/OFF ButtonSTART/PAUSE Button Delay Start Button Extra Rinse Button Temperature ButtonAcoustic Signals Function Time Save ButtonPermanent Extra Rinse Function ProgrammesExtra SPÜLEN5 No Spin Consumption ValuesLoading the Laundry Using the ApplianceUsing the Detergent and Additives Before First USECheck the position of the flap Interrupt a Programme Setting and Starting a ProgrammeCancel a Programme SET the Delay StartCancel the Delay Start AT the END of ProgrammeOpen the Door Detergents and Additives Helpful Hints and TipsLaundry Load Stubborn StainsCare and Cleaning Drain Pump Detergent DispenserPage Inlet Hose Filter Valve FilterEmergency Drain Frost Precautions Trouble Shooter and ServiceDelay start is set Service Technical Data InstallationUnpacking Page English Inlet Hose Positioning and LevellingWater Drainage Water-stop devicePage English 132940731-A-482010