Electrolux Full Size Tumble Action Washer Unpacking, Location of Your Washer

Page 4

ROUGH-IN DIMENSIONS 17

< (43.2) >

43/8

(11.2) > <

^ 8

(20.4)

v

ÑÒ

IMPORTANT

MINIMUM INSTALLATION CLEARANCES

When installed in alcove: Sides, Rear, Top = 0 in (0 cm).

When installed in closet: Sides, Rear, Top = 0 in (0 cm), Front = 1 in (2.54 cm).

Closet door ventilation openings required: 2 louvers each 60 in2 (387 cm2) - 3 in (7.6 cm) from top and bottom of door.

UNPACKING

1.Cut the shipping carton along the dotted line along the base of the unit.

2.While in the carton carefully lay the washer on its back side.

3.Remove the styrofoam base.

4.Carefully return the washer to an upright position and remove the carton.

5.Carefully move the washer to within 4 feet (122cm) of the final location.

6.Remove the following from the back side of the washer:

3 bolts,

3 yellow

plastic spacers, 2 or 3 metal "P" clamps.

BOLT

SPACER

"P"CLAMP

7.Remove the service panel from the front of the washer.

8.Remove the 4 nuts and 6 large washers that attach the 2 yellow shipping braces to the drum and the base. Lift up on the drum and remove the braces (a yellow ribbon surrounds the items to be removed). These braces must be removed to allow the power supply cord to be released from the shipping ring.

9.Remove the large styrofoam block located under the drum. Lift up on the drum, tilt the base of the foam block inwards

toward the rear of the washer until free, then pull it out.

10.Remove and discard

the yellow ribbon and label from the front of the washer.

LOCATION OF YOUR WASHER

DO NOT INSTALL YOUR WASHER:

1.In an area exposed to dripping water or outside weather conditions. The ambient temperature should never be below 60 degrees F (15.6 degrees C) for proper washer operation.

2.In an area where it will come in contact with curtains or drapes.

3.In an area (garage or garage-type building) where gasoline of other flammables are kept or stored (including automobiles).

4.On carpet. Floor MUST be solid with a maximum slope of 1/2 in. per foot (1.27 cm

per 30.5 cm). To ensure vibration or movement does not occur, reinforcement of

the floor may be necessary.

4

11. From the rear of the washer, carefully pull out the power supply cord through the hole in the backsheet.

12.Replace the service panel and screws.

NOTE: If the washer is to be transported at a later date, the shipping support hardware must be reinstalled to prevent shipping damage.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Installation Safety Instructions Protect Children Prevent FirePrevent Injury PRE-INSTALLATION Requirements Electrical RequirementsGrounding Requirements Water Supply RequirementsUnpacking Location of Your WasherCable InstallationTie Commercial Appliance Warranty Information Lea todas instrucciones antes usar esta lavadora Prevenga incendioProteja a los niños Evite lesionesRequisitos Antes DE LA Instalacion Requisitos ElectricosRequisitos Para EL Suministro DE Agua Requisitos Para EL DrenajeDimensiones Para LA Instalacion Ubicacion DE SU Lavadora Ubacacion DE SU Lavadora DesempaqueNo Instale SU Lavadora Importante Despejes Minimos DE InstalacionInstalacion Piezas DE RepuestoSujetacables En modelos equipados con drenaje por gravedadInformación de Garantía Comercial del Electrodoméstico

Full Size Tumble Action Washer specifications

The Electrolux Full Size Tumble Action Washer is a remarkable appliance that redefines laundry convenience, efficiency, and performance. Designed with modern consumers in mind, this washer integrates advanced technologies to create a seamless laundry experience. One of the most notable features of this model is its innovative tumble action design, which ensures thorough cleaning while being gentle on clothes. The drum's unique motion helps to lift and separate clothes, allowing detergent to penetrate fabrics more effectively, resulting in cleaner laundry.

This washer comes with a variety of wash cycles and options to cater to different fabric types and soil levels. From heavy-duty cycles for tough stains to delicate settings for fragile items, users can easily customize their laundry experience. Additionally, the machine features a time-saving quick wash option that can deliver clean clothes in a fraction of the time, perfect for those busy days when time is of the essence.

Efficiency is at the heart of the Electrolux Full Size Tumble Action Washer. It is designed to be energy and water-efficient, boasting an impressive Energy Star certification. By using innovative technologies, this washer minimizes water usage while still maintaining optimal cleaning performance. Furthermore, the adaptive load sensing feature adjusts water levels according to the load size, ensuring that every wash is cost-effective and eco-friendly.

Another standout characteristic is the advanced vibration reduction technology, which significantly diminishes noise and vibration during operation. This feature makes it an excellent choice for homes where laundry is done frequently and at all hours. The washer’s sleek, modern design also makes it an attractive addition to any laundry room.

For added convenience, the Electrolux washer includes a user-friendly control panel with intuitive settings and options. The large capacity drum allows for bigger loads, reducing the number of washes needed and saving users valuable time. In addition, the self-cleaning dispenser ensures that detergent residues do not accumulate, maintaining peak performance.

In conclusion, the Electrolux Full Size Tumble Action Washer combines advanced technologies with user-friendly features to provide a superior laundry experience. Its capacity, efficiency, and innovative design make it a top choice for individuals and families looking to simplify their laundry routines.
Top Page Image Contents