Electrolux LAVAMAT 74810 What to do if, Door and rubber collar, Remedying small faults yourself

Page 19

Door and rubber collar

Regularly check whether deposits or foreign bodies are present in the folds of the rubber collar or on the inside of the glass door.

Clean the glass in the door and the rubber collar regularly.

What to do if...

Remedying small faults yourself

If during use of the appliance one of the following error codes is shown in the multi-display:

–E10 (Problems with the water inflow),

–E20 (Problems with the water outflow),

–E40 (door open),

please consult the following table.

After the error has been remedied, press the START/PAUSE button.

In the event of other errors (E and a number or letter): Switch the ap- pliance off and then on again. Set the programme again. Press the START/PAUSE button.

If the error appears again, please contact your local Service Force Cen- tre, stating the error code.

	Problem	Possible cause	Remedy
		Mains plug not plugged in	Connect the plug to a mains
		or fuse not working.	socket. Check fuse.
	Washing machine is not	Loading door not closed	Close loading door - there
	Washing machine is not	properly.	should be an audible click.
	working.
		The START/PAUSE button	Press the START/PAUSE for a
		has not been pressed for	Press the START/PAUSE for a
		has not been pressed for	longer period of time.
		long enough.	longer period of time.
		long enough.

	The door cannot be	The child safety device has	Deactivate the child safety
	closed.	been activated.	device.
	When a button is	The selected function	Select another function.
	pressed, Err appears in	cannot be combined with	Select another function.
	the multi-display.	the programme set.
	E40 appears.
	The END indicator	The door is not closed	Close the door properly.
	flashes 4x, and an	The door is not closed	Close the door properly.
	flashes 4x, and an	properly.	Restart the programme.
	acoustic signal sounds	properly.	Restart the programme.
	acoustic signal sounds
	4x.

19

Image 19

Contents Lavamat Dear Customer Following symbols are used in the textContents Safety information concerning installation Installation and connection instructionsFollow the Installation and connection instructions SafetyPrior to using the appliance for the first time Child safetyResulting overheating may constitute a fire hazard General safetyControl panel Description of the applianceRefresh Programme overviewApplication/Features Care Symbols1 Sorting washing Before the first washPreparing and sorting washing Preparing washingOpen the door pull the handle on the door Running a wash cycleOpening the door/loading washing Adding detergent /conditionerWashing powder/tablets for the main wash cycle If you are using liquid detergentChanging the spin speed/selecting rinse hold Switching on the appliance/selecting a programmeShortened wash programme for lightly soiled items Selecting additional programmesStarting a programme Setting the delay timerProgramme sequence End of the wash cycle/removing the washing Interrupting a programme/adding washingOverdosing Deactivating the child safety device Child safety deviceWashing drum Cleaning and maintenanceCleaning procedure Detergent dispenser drawerDoor and rubber collar Remedying small faults yourselfClean the glass in the door and the rubber collar regularly What to do ifFlashes 1x, and an There are grey stains on the washing If the wash result is not satisfactoryFoam can still be seen following the final rinse Carrying out an emergency drain When the water has all drained awayThere are white residues on the washing Drain pump Packaging material DisposalOld appliance Consumption values Technical dataThis washing machine cannot be built-in Safety information concerning installationRemoving the transit packaging Installing the applianceWhen using a sack trolley to transport the washing machine Transporting the applianceWhere to install If the appliance is to stand on a base Making the appliance levelElectrical Connection Brown Live Wire coloured green and yellowPermanent Connection Connecting the appliance to the water supplyPermitted water pressure 35m long pressure hose is supplied with the appliance Water inletWater Drainage From your Service Force CentreFor drainage into an outlet Pumping heights of over 1 metre Great Britain Warranty conditionsOtros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im AuslandCustomer Service Centres Hong Kong Lithuania Russia Major Appliances 0870 5 929Customer Care For general enquiries concerningAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG