Electrolux LAVAMAT 74810 manual Water inlet, 35m long pressure hose is supplied with the appliance

Page 32

Water inlet

A 1.35m long pressure hose is supplied with the appliance.

If a longer inlet hose is required, only hoses from the manufacturer are to be used. Your local Service Force stocks hose kits of different lengths.

3 Sealing rings are either inserted in the plastic nuts of the threaded hose fitting or are included as spare parts. Do not use any other sealing rings.

Important! All threaded hose fit- tings must only be tightened by hand.

1.Connect the hose with the right-an-

gle connector to the machine.

Important! Do not position the inlet hose vertically downwards. Position it to the right or the left as shown in the illustration.

2.Connect the hose with the straight

connector to a water tap with an R ¾ (inch) screw thread.

3. Slowly turn on the tap and check that all connections are watertight.

Image 32

Contents Lavamat Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety information concerning installationSafety Prior to using the appliance for the first timeChild safety Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardDescription of the appliance Control panelProgramme overview RefreshApplication/Features Care Symbols1 Before the first wash Preparing and sorting washingPreparing washing Sorting washingRunning a wash cycle Opening the door/loading washingAdding detergent /conditioner Open the door pull the handle on the doorIf you are using liquid detergent Washing powder/tablets for the main wash cycleSwitching on the appliance/selecting a programme Changing the spin speed/selecting rinse holdSelecting additional programmes Shortened wash programme for lightly soiled itemsProgramme sequence Setting the delay timerStarting a programme Overdosing Interrupting a programme/adding washingEnd of the wash cycle/removing the washing Child safety device Deactivating the child safety deviceCleaning and maintenance Cleaning procedureDetergent dispenser drawer Washing drumRemedying small faults yourself Clean the glass in the door and the rubber collar regularlyWhat to do if Door and rubber collarFlashes 1x, and an Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washing When the water has all drained awayCarrying out an emergency drain Drain pump Old appliance DisposalPackaging material Technical data Consumption valuesSafety information concerning installation This washing machine cannot be built-inInstalling the appliance When using a sack trolley to transport the washing machineTransporting the appliance Removing the transit packagingWhere to install Making the appliance level If the appliance is to stand on a baseBrown Live Wire coloured green and yellow Electrical ConnectionPermitted water pressure Connecting the appliance to the water supplyPermanent Connection Water inlet 35m long pressure hose is supplied with the applianceFor drainage into an outlet From your Service Force CentreWater Drainage Pumping heights of over 1 metre Warranty conditions Great BritainFurther after-sales service agencies overseas Autres agences étrangères assurant le service après-venteWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroCustomer Service Centres Hong Kong Lithuania Russia 0870 5 929 Customer CareFor general enquiries concerning Major AppliancesAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG