Electrolux 74630 manual Setting the delay timer / soaking duration Delay timer, Soaking duration

Page 19

Operating Instructions

Setting the delay timer / soaking duration

Delay timer

The DELAY TIMER button allows the start of a washing programme to be delayed by 1 hour up to a maximum of 19 hours.

0 To do this, press the DELAY TIMER button repeatedly until the desired start delay is shown in the multi display, for example 12h for a 12 hour delay.

If 19h is displayed and you press again, 0h ap- pears, followed by the duration time of the set programme (displayed in minutes e. g.126).

In this state the start delay timer is not set.

 

Soaking duration

 

When the SOAKING button is pressed, you can extend the soaking pe-

 

riod with the DELAY TIMER button (maximum 10 hours and

 

approx. 20 minutes).

3

Without DELAY TIMER, the soaking period is approximately 30 minutes,

 

plus a pre-wash time of 20 minutes.

0To adjust, press the DELAY TIMER button as often as necessary until the required soaking period is shown in the multi display, e.g.1h (=1 hour).

After approximately 2 seconds, the multi display shows the duration in minutes.

 

This duration time is made up as follows:

 

 

 

 

Selected soaking period

e.g.

1h =60 Minutes

 

+ Heating-up / pre-wash time

e.g.

Approx. 20

Minutes

 

+ Duration of the selected wash

e.g.

Approx. 126

Minutes

 

programme

 

 

 

 

= Displayed value

e.g.

Approx. 206

Minutes

3

While SOAKING is running, PRE-WASH lights up on the programme

 

progress display.

 

 

 

19

Image 19
Contents ÖKO-LAVAMAT 74630 update Dear Customer Contents Installation Safety Precautions Installation and connection instructionsPage Prior to initial start-up SafetyIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsStain removers Description of the ApplianceFront view Detergent dispenser drawerProgramme selector Control panelWool P hand wash Tions cannot be selected any buttons pressed do not Stain removers only become effective at higher temperaturesProgramme option buttons Shortened main washing cycle for lightly soiled washingProgramme selector Load in kg Water Energy Time Temperature What does Update mean?Consumption data and wash times Preparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening How much detergent and conditioner?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Changing the spin speed/Selecting Rinse Hold Setting the Washing ProgrammeSoaking duration Setting the delay timer / soaking duration Delay timerSee Programme Tables for maximum loads Door Indicator Display START/PAUSEOpening and closing the door Loading the washingAdding detergent / conditioner If using liquid detergent / tabletsAdd detergent / conditioner ConditionersProgramme progress display If the delay timer has been setStarting the washing programme Washing Programme ProgressChanging the Spin Speed Change the washing programmeChanging or stopping the wash programme Selecting the programme optionsElectricity mains Washing cycle is complete/Removing the washingType of washing Max. load Programme Possible Care symbolProgramme tables WashingSeparate spin Type of washing Max. Load Programme selector Dry weightSeparate conditioning/starching Separate rinseMaintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpGency emptying Problem Possible Cause Remedy Trouble ShootingWhat to do if Machine is not level Limescale or is faulty It repaired if necessaryWater tap is closed Open the water tap No water flows Not been removedCial accessory Clean the detergent disContact your local Service Fault code E20Door High water level or a high Tap is blocked Clean the filter Rinsing water isCloudy Content Detergent if necessary Lights up greenIf there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingAdditional Rinse RINSE+ When the water is completely drainedSetting the additional rinse function Cancelling the additional rinse functionStarted Child Safety FeatureCancelling the child safety feature Washing programme can beInstallation Safety Precautions Installation and connection instructionsTransporting the appliance Installation of the applianceRemove transport packaging Caps D 2 each and G 1 each Cover the hole with the cap GInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Disposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm European Guarantee Guarantee ConditionsGreat Britain Otros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im AuslandEstonia Latavia Poland Croatia New ZealandBulgaria Kuwait/Arabian Gulf Cyprus Lebanon OmanHungary Israel Malaysia Saudi ArabiaJapan Singapore Slovenia Thailand Slovakia Rep South AfricaMulti-display , 19, 22, 30 Automatic adjustment foot . . . . . . . . . .9Customer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG