Craftsman 919.67028 owner manual Product Specifications, General Recommendations

CUSTOMER		RESPONSIBILITIES TABLE
MAINTENANCE			TASK		Before each use	Every	25	Every 50	Every 100
						_hoors or year y		hours or yearly	hours or yearly
PRESSURE WASHER
Check/clean		inlet screen.			x
ICheck	hioh pressure			hose.	x
Check	soap	and chemical hose and filter			x
iCheck gun and wand for leaks.					x
Purge pump		of air and contaminants			x
ENGINE
Check	oil level
Change engine			oil
Clean air cleaner and precleaner
Clean/replace		spark		plug					X
Clean engine		muffler		& finger guard					x
Prepare for storage					Prepare unit for	storage	if it is to	remain idle for longer than 30 days.

Product Specifications

Pressure	Washer Specifications
Pressure		2400
Flow Rate		2.4 GPM
Cleaning	Units (psi x GPM)	5760

General Recommendations

The warranty of the high pressure washer does not cover items that have been subjected to operator abuse or negligence. To receive full value from the

warranty, operator must maintain high pressure washer as instructed in this manual.

Some adjustments will need to be made periodically to maintain your high pressure washer.

Engine	Specifications
RPM		3600
Rated	Horsepower	6.0
Spark Plug Gap		.030" (0.76ram)
Gasoline Capacity		1.5 quarts
Oil (22 oz. capacity)		SAE 30 weight

Once a year you should clean or replace the spark plug, and clean or replace the air filter, and thoroughly check the gun and wand assembly for wear. A clean spark plug and clean air filter assure proper fuel-air mixture and help your engine run better and last longer.

NOTE: Over time the o-rings in the gun assembly become worn. Attached to your owners manual is a replacement o-ring and split backup ring.

O-ring.,..._ t_ Split Backup

_Ring

11-ENG o2_90 P_0 _lS/C_