Craftsman 919.67028 owner manual Hazard, What can Happen

Page 4

HAZARD

ELECTRICAL

SHOCK

RISK TO FLUID

INJECTION

RISK OF CHEMICAL BURN

IP_;_

RISK OF HOT SURFACES

RISK OF INJURY AND

PROPERTY DAMAGE

WHEN

TRANSPORTING OR

STORING

WHAT CAN HAPPEN

Spray directed at electrical outlets or switches, or objects connected to an electrical circuit, could result in a fatal electrical shock.

Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

Relieve system pressure before attempt-

ing maintenance or disassembly of equipment.

Use of acids, toxic or corrosive chemi-

cals, poisons, insecticides, or any kind of flammable solvent with this product

could result in serious injury'or death.

Contact with hot surfaces, such as

engines exhaust components, could result in serious burn.

Fuel or oil can leak or spill and could

result in fire or breathing hazard, serious mlury or death can result. Fuel or oil leaks

will damage carpet, paint or other surfaces.

HOW TO PREVENT IT

Unplug any electrically operated product before attempting to clean it. Direct spray away from electric outlets and switches.

Never place hands in front of nozzle.

Direct spray away from self and others.

Make sure hose and fittings are tightened

and in good condition. Never hold onto the hose or fittings during operation.

Do not allow hose to contact muffler.

Never attach or remove wand or hose fittings while system is pressurized.

Use only hose and high pressure accessories rated for pressure higher than your pressure washer's p.s.i.

To relieve system pressure, shut off engine, turn off water supply, and pull gun trigger until water stops flowing.

Do not use acids, gasoline, kerosene, or any other flammable materials in this

product. Use only household detergents, cleaners and degreasers recommended for use in pressure washers.

Wear protective clothing to protect

eyes and skin from contact with sprayed materials.

During operation, touch only the control surfaces of the pressure washer. Keep children away from the pressure washer at all times. They may not be able to recognize the hazards of this product.

If pressure washer is equipped with a fuel shut-off valve, turn the valve to the off position before transporting or storing to avoid fuel leaks. If pressure washer is not equipped with a fuel shut-off valve, drain the fuel from tank before transporting or storing. Only store fuel in an OSHA approved container. Always place pressure washer on

a protective mat when transporting to protect against damage to vehicle from leaks. Remove pressure washer from vehicle immediately upon arrival at your destination. Do not store pressure washer inside build- ings occupied by humans or pets.

ce_9o R_ 0 wls/ce

4-ENG

Image 4
Contents Jcrrftsmrni Sold by Sears Canada, Inc., Toronto, Ont. MSB2B8Full ONE Year Warranty on Craftsman High Pressure Washer Full TWO Year Warranty on Craftsman EngineSears Canada, Inc., Toronto, Ont. M5B2B8 InlHOW to Prevent IT Never defeat the safety features of this productHazard What can HappenNozzle Cleaning Kit Bag ContainingWrench Engine OilRemove Pressure Washer from Carton Tools Required for Assembly Adjustable wrenchPreparing the Pressure Washer for First Use Know Your High Pressure Washer Washer holderGun/Wand HolderBottle of SAE 30 weight oil is included in the carton Engine OilStopping Your Pressure Washer GasolineRabbit position Ozc9oR,,oAdjusting Fan Spray Using Soaps/ChemicalsBarb Fitting Approved Cleaning Fluid Soap Knob + mor Less soapProduct Specifications General RecommendationsPressure Washer Maintenance Pump Maintenance Changing Pump OilEngine Maintenance Check and Clean Inlet Screen Examine inlet screenClean and Replace Spark Plug Clean Pre-Cleaner and Air Cleaner CartridgeCheck Engine -- Finger Guard/Muffler Nozzle Cleaning CarburetorPreparing Pressure Washer for Storage Pump PreparationEngine Preparation Symptom SolutionEngine wont start CauseM23 REF NO. Part NumberTorque to Description 525 383 914 Label KITHead 15520@ 741692 JR 122U 276 Intake Gasket529A 957 670Emissionslabel 332100 12110 456Valve Gasket SET Carburetor Overhaul KIT Engine Gasket SETCarburetor Gasket SET 27-ENG Model no If calling locally, please use one of the following numbersHalifax Following Information