Indesit IDCA 735 instruction manual

Page 3

Condenser unit - remove any fluff build-up from the condenser on a monthly basis.

Step 1

Open the condenser cover - grip the handle and pull towards you.

Step 2

Remove the condenser by turning the 3 catches, then pull the condenser towards you. (It is normal for some residual water to be left in the tubes).

Step 3

Clean the condenser with running water over the rear side to remove any fluff deposits.

Step 4

Replace the condenser unit; make sure that the unit is securely in place, that all 3 catches are fixed and that the position arrows on the front end of the condenser are pointing upwards.

Failure to clean the condenser unit may cause premature faults to the dryer.

Image 3

Contents Tumble Dryer Filling of the Water Container Important informationPage Preliminary information InstallationWhere to install the tumble dryer Electrical connections VentilationFeatures Description of the tumble dryerControl panel Indicator lights Starting and selecting a programme How to carry out a drying cycleProgramme chart Programmes and optionsSpecial/Sport/Partial Programmes Fabric Opening the door OptionsLaundry Sorting laundryCare labels Special items Drying timesAutomatic drying times Saving energy and respecting the environment General safetySuggestions Information on recycling and disposalCare and maintenance Troubleshooting Problem Possible causes / SolutionsAssistance Centre see Assistance Before contacting the Technical Assistance EN Centre AssistanceSpare parts Comparative programmesGuarantee Months Parts and Labour GuaranteeReplacement of any removable parts made of glass or plastic After Sales Service Essential Contact InformationRecycling & Disposal Information Page 195075034.00