JVC RX-888RBK manual Press %/ Þ/ @/ #to adjust the SEA mode as you want, To Tuner

Page 40

English

4. Press %/ Þto move to “SEA ADJUST.”

The SEA ADJUST menu appears.

5.Press %/ Þ/ @/ #to adjust the SEA mode as you want.

SEA ADJUST

SEA USERMODE

100 1k 10kHz

SET:MEMORY

“LFE ATT.”:

Set the low frequency effect attenuator

 

level (see page 15).

“COMP.”:

Set the dynamic range compression

 

(see page 15).

“DIGITAL 1/2/3”:

Set the digital input terminal

 

(see page 13).

“FL DISP.”:

Shows the disc text information on the

 

display (see page 13).

@/ # : Select the frequency ranges.

%/ Þ: Adjust the frequency levels.

6.Press SET to store the setting into the SEA USERMODE.

•If you press EXIT, without pressing SET in this step, you can return to the SEA menu. (The adjustment you have made is active but not stored.)

7.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Setting the Basic Setting Items (Also see

pages 12 – 15)

Notes:

*Not adjustable when “CENTER SPK” is set to “NONE” (see page 14).

**Not adjustable when “REAR SPK” is set to “NONE” (see page 14).

4.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Operating the Tuner (Also see pages 17 and 18)

1. Press MENU.

The MAIN MENU appears on the TV.

• Pressing one of the % / Þ / @/ #buttons also displays the

1. Press MENU.

The MAIN MENU appears on the TV.

• Pressing one of the %/ Þ / @/ #buttons also displays the

MAIN MENU.

2. Press %/ Þto move

to “TUNER

TUNER CONTROL

MAIN MENU.

2.Press %/ Þto move to “SETTING,” then

press @/ #.

SETTING 1

 

 

SUBWOOFER

: NO

FRONT

SPK

: LARGE

CENTER SPK

: SMALL

REAR

SPK

: LARGE

CONTROL,” then

press @/ #.

The TUNER CONTROL menu appears.

PRESET CH : 1

BAND :FM FREQUENCY : 87.50MHz

FM MODE :AUTO

PRESET MEMORY

:OPERATE

The SETTING 1 or SETTING 2 menu appears.

CNTR

DELAY

: 3msec

REAR

DELAY

: 5msec

CROSSOVER

:100Hz

 

NEXT

PAGE

3. Press %/ Þto move to the item you want to set or adjust, then press @/ #.

3.Press %/ Þto move to the item you want to set or adjust, then press

@/ #.

•To go to the SETTING 2

menu, move to “NEXT PAGE,” then press @/ #.

•To go back to the SETTING

1 menu, move to “PREVIOUS PAGE,” then press @/ #.

:ENTER

SETTING 2

LFE ATT. : 0dB

COMP. : OFF

DIGITAL 1 : DBS

DIGITAL 2 : CD

DIGITAL 3 : MD

FL DISP. : NORMAL

PREVIOUSPAGE

:ENTER

On the TUNER CONTROL menu, you can do the following:

“PRESET CH”:

Select a preset channel station.

“BAND”:

Select the band.

“FREQUENCY”:

Tune in a station manually.

“FM MODE”:

Select the FM reception mode.*

“PRESET MEMORY”: See “Storing the Preset Stations” on the next page.

Note:

* Not displayed when an AM (MW/LW) station is selected.

4. When you finish, press EXIT repeatedly until the

On the SETTING 1 and 2 menus, you can do the following:

“SUBWOOFER”:

Set the subwoofer information (see

 

page 12).

“FRONT SPK”:

Set the front speaker information (see

 

page 14).

“CENTER SPK”:

Set the center speaker information (see

 

page 14).

“REAR SPK”:

Set the rear speaker information (see

 

page 14).

“CNTR DELAY”:

Adjust the delay time of the center

 

speaker output (see page 14). *

“REAR DELAY”:

Adjust the delay time of the rear

 

speaker output (see page 14). **

“CROSSOVER”:

Set the crossover frequency

 

(see page 15).

menu disappears from the TV.

37

Page 39 Page 41
Image 40
Page 39 Page 41
Contents RX-888RBK Per I’ltalia Español Italiano Table of Contents Parts Identification Remote ControlFront Panel Before Installation Checking the Supplied AccessoriesConnecting the FM and AM MW/LW Antennas Getting StartedConnecting the Speakers Basic connecting procedureConnecting the front speakers AM MW/LW Antenna ConnectionsConnecting Audio/Video Components Connecting the rear and center speakersConnecting the subwoofer speaker About the speaker impedanceVideo component connections VHS VCRTo S-video output To composite‚ To composite video output DVD playerConnecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet Digital connectionsTurning the Power On and Off Standby From the remote controlBasic Operations Selecting the Source to PlayAdjusting the Volume Selecting the Front SpeakersEtc Turn Source Selector toAttenuating the Input Signal Listening at Low Volume LoudnessAdjusting the Subwoofer Output Level Muting the SoundBasic Settings Adjusting the Front Speaker Output BalanceSetting the Subwoofer Information Recording a SourceSelecting the Analog or Digital Input Mode Digital Input Digital in Terminal SettingShowing the Text Information on Display Setting the Speakers for the DSP Modes Center Delay Time SettingFront, Center, and Rear Speaker Setting Rear Delay Time SettingCrossover Frequency Setting Low Frequency Effect Attenuator SettingDynamic Range Compression Setting Frequency appears on the displayStoring the Basic Settings Adjustments One Touch Operation Adjust the sound using the functions listed aboveUsing the Sleep Timer Press ONE Touch OPERATION. OnetouchoperationTuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Assigning Names to Preset Stations Selecting the FM Reception ModeUsing the RDS Radio Data System to Receive FM Stations What information can RDS signals provide?To search for a program using the PTY codes Searching for a Program by PTY CodesPress PTY Search while Turn Multi JOG until the PTYPTY codes Switching to a Broadcast Program of Your Choice Temporarily Press EON so that the last selectedProgram type appears on Display Press TA/NEWS/INFO untilSelecting Your Favorite SEA Mode Using the SEA ModesCreating Your Own SEA Mode Using the DSP Modes 3D-PHONIC modesDAP modes With 3D Theater selectedDVD Multi Playback Mode Surround modesAvailable DSP Modes According to the Speaker Arrangement FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesAdjusting the Surround Modes An appropriate Surround mode Adjust the center tonePress DOLBY/DTS/MPEG Surround ON/OFF to activateJVC Theater Surround adjustments Repeatedly until Theater orDIG Theater appears on Display Center tone level you wantActivating the DSP Modes Lamp on the button lights upSelect and play a sound source Press Surround ON/OFF soMode you want appears on Display To cancel the DSP modePress Surround Mode repeatedly until For the other DSP modesUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModeDVD Multi appears on Display Tone appears on the displayPress DVD Multi so that DVD 10 keys are activated for adjusting the soundMulti appears on the display Using the On-Screen Menus Input Attenuator mode Press %/ Þto move to Sound CONTROL, then press @/ #Press %/ Þto move To Subwfr LevelTo SEA Mode Press %/ Þto move To SEA, then press @Press %/ Þto move to SEA, then press @ / # Press %/ Þto move to Surround LEVEL, then press @ / #Press %/ Þ/ @/ #to adjust the SEA mode as you want Press SET to store the setting into the SEA UsermodePress %/ Þto move to SETTING, then Press @/ # Setting the Basic Setting Items Also seeTo Preset Name To PresetPress %/ Þto move to Tuner CONTROL, then press @/ # Then press SETCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverSame time Automatic Source SelectionText Compu Link Remote Control System Displaying the Disc Information on the TV screenDisc Search Only for CD Player Disc Title InputPress Text Display while CD or MD is selected as the source Showing the Disc Information on the TV ScreenTo exit from the Disc information screen Disc Information screen appears on the TVPress Text Display while CD is selected as the source Press %/ Þto move To SEARCH, thenPress %/ Þto move to SEARCH, then Press SET Press %/ Þto move to Performer Then press SETPress %/ Þto move To Search Then press SET Press %/ Þto move To GENRE, then Press SETPress %/ Þto move To Title Input Then press SET Entering the Disc InformationPress Text Display while MD is selected as the source Press %/ Þto move to the genre you want, then press SETTo insert a space, press %/ Þ To correct an incorrect characterOperating JVC’s Audio/Video Components Sound control section AmplifierCD player TunerTurntable Cassette deckMD recorder DVD playerIf there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentRelease TV/CATV/DBS Try to operate your TV by pressing TV/CATV DBSRelease VCR If there are more than one code listed for your brandTry to operate your VCR by pressing VCR Manufacturers’ codes for TV MTC NEIRBM RFTManufacturers’ codes for DBS tuner Manufacturers’ codes for Catv converters Manufacturers’ codes for VCRESC ITVSamsung 240 Sansui 041, 067 Sanyo 046 Saville 352 Schaub Lorenz 000, 005, 041, 104 Schneider 000, 072004 White WestinghouseTroubleshooting Problem Possible Cause SolutionSpecifications AmplifierAudio VideoTuning Range Usable Sensitivity Signal-to-Noise Ratio FM tuner IHFAM MW/LW tuner GeneralEN, GE, FR, NL, SP, IT 0499HIMMDWJEM

RX-888RBK specifications

The JVC RX-888RBK is a powerful and versatile stereo receiver designed for audiophiles and casual listeners alike. Packed with a range of features, this receiver provides exceptional sound quality, making it suitable for various applications, from home theaters to music listening.

At the heart of the RX-888RBK is a robust amplification system, delivering 100 watts of power per channel. This ensures that even large rooms can be filled with clear and dynamic sound, achieving a rich audio experience whether you're watching movies or enjoying your favorite music. The receiver supports FM and AM radio, allowing users to tune into their favorite stations with ease.

One of the standout features of the RX-888RBK is its multi-input capability. It comes equipped with multiple audio inputs, including six line-level inputs, a dedicated phono input for turntables, and two tape inputs/outputs. This flexibility ensures that users can connect various devices, such as CD players, tape decks, and gaming consoles, without losing audio quality.

The RX-888RBK also boasts a built-in graphic equalizer that allows for precise audio tuning. This feature provides users the ability to adjust the sound profile to suit their preferences, enhancing bass, treble, and midrange frequencies. This level of customization ensures optimal sound reproduction across a variety of music genres.

Another significant characteristic of the RX-888RBK is its user-friendly design. The front panel layout is intuitive, featuring clearly labeled controls and a large display. This makes it easy for users to navigate through settings and controls. Additionally, the remote control that accompanies the receiver provides added convenience, allowing users to adjust settings from the comfort of their couch.

The receiver's solid build quality enhances durability, while the sleek design fits well in any home entertainment setup. Furthermore, the RX-888RBK includes advanced protection circuitry, which helps to prevent damage to both the receiver and connected speakers during operation.

In terms of connectivity, the RX-888RBK offers standard speaker outputs for easy connection to a variety of speaker systems, ensuring compatibility with both stereo and surround sound applications.

In summary, the JVC RX-888RBK is an excellent choice for those seeking a reliable and feature-packed stereo receiver. With its powerful audio output, multiple connectivity options, customizable sound settings, and user-friendly interface, this receiver delivers a comprehensive audio experience that meets the demands of both casual listeners and dedicated audiophiles. Whether for music playback or home theater use, the RX-888RBK provides a solid foundation for any audio setup.
Top Page Image Contents