JVC RX-888RBK manual Press Text Display while CD or MD is selected as the source, Press Exit

Page 44

English

OPERATIONS

To use this remote control system, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 7), and set the TV’s input mode to the proper position to which the receiver is connected. Make sure you have connected the CD player or

MD recorder equipped with the TEXT COMPU LINK remote control system. If not, you cannot use the following functions.

On-Screen Operation buttons (on the remote control)

1Source name: CD or MD

2Select or , then press SET to change the disc.

3 Track numbers and track titles.

•The current playing (selected) track is indicated in yellow.

•When you move to a track number, you can change the track information by pressing @/ #. Each time you press the button, track information alternates between its track title and its performer. (You can also start playing the track by pressing SET.)

4Select this (move in front), then press SET to go to

the DISC SEARCH screen (see page 42).

5Select this (move in front), then press SET to go to

the TITLE INPUT screen (see page 43).

 

 

TV/CATV/DBS

VCR 1

DVD

DVD MUILTI

CD

TAPE/MD

TV/DBS

VIDEO

PHONO

FM/AM

VCR 1

VCR 2

ANALOG/DIGITAL

SLEEP

SURROUND

CNTR TONE

 

CNTR

 

ON/OFF

1

2

 

3

 

 

 

MENU

 

SURROUND

TEST

 

REAR-L

MODE

4

5

 

6

 

 

 

ENTER

 

DISC

EFFECT

 

REAR-R

 

7/P

8

 

9

SOUND

SEA MODE

SUBWOOFER

 

10

0

 

+10

 

RETURN

FM MODE/MUTING

100+

AUDIO/

TV/VCR

MENU

 

CATV/DBS

 

SET

EXIT

TEXT

 

DISPLAY

TV VOL

CHANNEL

 

VOLUME

TV/VIDEO

VCR 1

TAPE

MUTING

 

CONTROL

 

/REW

PLAY

 

FF/

PTY

PTY SEARCH

PTY

RECSTOPPAUSE

DISPLAY MODE

MENU

 

 

SET

EXIT

TEXT

DISPLAY

 

6This appears only when a CD Text is selected.

7Disc information such as the disc title, performer, and music genre.

When this is selected ( in front), you can change the disc information by pressing @/ #. Each time you press the button, disc information (see “Note on 7”) changes.

8Select or , then press SET to change the track.

9 Usable buttons and their functions for the current selection.

Indication here will be changed according to what is

currently selected ( in front) on the screen. See “Note on 9.”

Note on 7:

The following information will appear on the display:

RM-SRX888R REMOTE CONTROL

Showing the Disc Information on the TV Screen

Press TEXT DISPLAY while “CD” or “MD” is selected as the source.

The Disc Information screen appears on the TV.

1

 

6

2

7

 

 

3

8

4

 

5

9

•Disc title

•Performer

•Genre

•Song writer

•Composer

•Arranger

•Message

Only recorded information will be shown. If there is no data, “NO DATA” will appear.

Note on 9:

For example, the SET button will be used to start play (PLAY), to go to the next screen (ENTER), and to determine the selection (ENTER).

To exit from the Disc information screen:

Press EXIT.

Notes:

•The on-screen display will disappear in the following case:

–if no operation is done for about 10 minutes.

–if you do any operation other than explained in this section.

•To control the MD recorder using the TEXT COMPU LINK remote control system, you have to change the source name shown on the display from “TAPE” to “MD.” (See page 12.)

•Some special characters and marks cannot be displayed correctly.

41

Page 43 Page 45
Image 44
Page 43 Page 45
Contents RX-888RBK Per I’ltalia Español Italiano Table of Contents Front Panel Remote ControlParts Identification Before Installation Checking the Supplied AccessoriesConnecting the FM and AM MW/LW Antennas Getting StartedConnecting the Speakers Basic connecting procedureConnecting the front speakers AM MW/LW Antenna ConnectionsConnecting Audio/Video Components Connecting the rear and center speakersConnecting the subwoofer speaker About the speaker impedanceVideo component connections VHS VCRTo S-video output To composite‚ To composite video output DVD playerConnecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet Digital connectionsTurning the Power On and Off Standby From the remote controlBasic Operations Selecting the Source to PlayAdjusting the Volume Selecting the Front SpeakersEtc Turn Source Selector toAttenuating the Input Signal Listening at Low Volume LoudnessAdjusting the Subwoofer Output Level Muting the SoundBasic Settings Adjusting the Front Speaker Output BalanceSetting the Subwoofer Information Recording a SourceShowing the Text Information on Display Digital Input Digital in Terminal SettingSelecting the Analog or Digital Input Mode Setting the Speakers for the DSP Modes Center Delay Time SettingFront, Center, and Rear Speaker Setting Rear Delay Time SettingCrossover Frequency Setting Low Frequency Effect Attenuator SettingDynamic Range Compression Setting Frequency appears on the displayStoring the Basic Settings Adjustments One Touch Operation Adjust the sound using the functions listed aboveUsing the Sleep Timer Press ONE Touch OPERATION. OnetouchoperationReceiving Radio Broadcasts Using Preset TuningTuning in Stations Manually Assigning Names to Preset Stations Selecting the FM Reception ModeUsing the RDS Radio Data System to Receive FM Stations What information can RDS signals provide?To search for a program using the PTY codes Searching for a Program by PTY CodesPTY codes Turn Multi JOG until the PTYPress PTY Search while Switching to a Broadcast Program of Your Choice Temporarily Press EON so that the last selectedProgram type appears on Display Press TA/NEWS/INFO untilCreating Your Own SEA Mode Using the SEA ModesSelecting Your Favorite SEA Mode Using the DSP Modes 3D-PHONIC modesDAP modes With 3D Theater selectedDVD Multi Playback Mode Surround modesAvailable DSP Modes According to the Speaker Arrangement FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesAdjusting the Surround Modes An appropriate Surround mode Adjust the center tonePress DOLBY/DTS/MPEG Surround ON/OFF to activateJVC Theater Surround adjustments Repeatedly until Theater orDIG Theater appears on Display Center tone level you wantActivating the DSP Modes Lamp on the button lights upSelect and play a sound source Press Surround ON/OFF soMode you want appears on Display To cancel the DSP modePress Surround Mode repeatedly until For the other DSP modesUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModeDVD Multi appears on Display Tone appears on the displayMulti appears on the display 10 keys are activated for adjusting the soundPress DVD Multi so that DVD Using the On-Screen Menus Input Attenuator mode Press %/ Þto move to Sound CONTROL, then press @/ #Press %/ Þto move To Subwfr LevelTo SEA Mode Press %/ Þto move To SEA, then press @Press %/ Þto move to SEA, then press @ / # Press %/ Þto move to Surround LEVEL, then press @ / #Press %/ Þ/ @/ #to adjust the SEA mode as you want Press SET to store the setting into the SEA UsermodePress %/ Þto move to SETTING, then Press @/ # Setting the Basic Setting Items Also seeTo Preset Name To PresetPress %/ Þto move to Tuner CONTROL, then press @/ # Then press SETCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverSame time Automatic Source SelectionText Compu Link Remote Control System Displaying the Disc Information on the TV screenDisc Search Only for CD Player Disc Title InputPress Text Display while CD or MD is selected as the source Showing the Disc Information on the TV ScreenTo exit from the Disc information screen Disc Information screen appears on the TVPress Text Display while CD is selected as the source Press %/ Þto move To SEARCH, thenPress %/ Þto move to SEARCH, then Press SET Press %/ Þto move to Performer Then press SETPress %/ Þto move To Search Then press SET Press %/ Þto move To GENRE, then Press SETPress %/ Þto move To Title Input Then press SET Entering the Disc InformationPress Text Display while MD is selected as the source Press %/ Þto move to the genre you want, then press SETTo insert a space, press %/ Þ To correct an incorrect characterOperating JVC’s Audio/Video Components Sound control section AmplifierCD player TunerTurntable Cassette deckMD recorder DVD playerIf there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentRelease TV/CATV/DBS Try to operate your TV by pressing TV/CATV DBSTry to operate your VCR by pressing VCR If there are more than one code listed for your brandRelease VCR Manufacturers’ codes for TV MTC NEIRBM RFTManufacturers’ codes for DBS tuner Manufacturers’ codes for Catv converters Manufacturers’ codes for VCRESC ITVSamsung 240 Sansui 041, 067 Sanyo 046 Saville 352 Schaub Lorenz 000, 005, 041, 104 Schneider 000, 072004 White WestinghouseTroubleshooting Problem Possible Cause SolutionSpecifications AmplifierAudio VideoTuning Range Usable Sensitivity Signal-to-Noise Ratio FM tuner IHFAM MW/LW tuner GeneralEN, GE, FR, NL, SP, IT 0499HIMMDWJEM

RX-888RBK specifications

The JVC RX-888RBK is a powerful and versatile stereo receiver designed for audiophiles and casual listeners alike. Packed with a range of features, this receiver provides exceptional sound quality, making it suitable for various applications, from home theaters to music listening.

At the heart of the RX-888RBK is a robust amplification system, delivering 100 watts of power per channel. This ensures that even large rooms can be filled with clear and dynamic sound, achieving a rich audio experience whether you're watching movies or enjoying your favorite music. The receiver supports FM and AM radio, allowing users to tune into their favorite stations with ease.

One of the standout features of the RX-888RBK is its multi-input capability. It comes equipped with multiple audio inputs, including six line-level inputs, a dedicated phono input for turntables, and two tape inputs/outputs. This flexibility ensures that users can connect various devices, such as CD players, tape decks, and gaming consoles, without losing audio quality.

The RX-888RBK also boasts a built-in graphic equalizer that allows for precise audio tuning. This feature provides users the ability to adjust the sound profile to suit their preferences, enhancing bass, treble, and midrange frequencies. This level of customization ensures optimal sound reproduction across a variety of music genres.

Another significant characteristic of the RX-888RBK is its user-friendly design. The front panel layout is intuitive, featuring clearly labeled controls and a large display. This makes it easy for users to navigate through settings and controls. Additionally, the remote control that accompanies the receiver provides added convenience, allowing users to adjust settings from the comfort of their couch.

The receiver's solid build quality enhances durability, while the sleek design fits well in any home entertainment setup. Furthermore, the RX-888RBK includes advanced protection circuitry, which helps to prevent damage to both the receiver and connected speakers during operation.

In terms of connectivity, the RX-888RBK offers standard speaker outputs for easy connection to a variety of speaker systems, ensuring compatibility with both stereo and surround sound applications.

In summary, the JVC RX-888RBK is an excellent choice for those seeking a reliable and feature-packed stereo receiver. With its powerful audio output, multiple connectivity options, customizable sound settings, and user-friendly interface, this receiver delivers a comprehensive audio experience that meets the demands of both casual listeners and dedicated audiophiles. Whether for music playback or home theater use, the RX-888RBK provides a solid foundation for any audio setup.
Top Page Image Contents