Hotpoint AQ113D 697 I manual Installation, Unpacking and levelling

Page 2

Installation

EN

! This instruction manual should be kept in a safe place

for future reference. If the washing machine is sold, given

 

 

away or moved, please ensure the manual is kept with

 

the machine, so that the new owner may benefit from the

 

advice contained within it.

 

! Read these instructions carefully: they contain vital

 

information relating to the safe installation and operation of

 

the appliance.

 

! Inside the pack containing this manual, you will also find

 

the guarantee and all the details necessary for installation.

 

Unpacking and levelling

Unpacking

1.Once you have removed all the packaging from the washing machine, make sure it has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2. Remove the 4 protective screws (used during transportation) and the corresponding spacer, located on the rear part of the appliance (see figure).

3.Close off the holes using the plastic plugs supplied in the pack.

4.Keep all the parts in a safe place; they will be needed again if the washing machine is moved to another location, to prevent the inside of the appliance being damaged.

! Packaging materials should not be used as toys for children.

Levelling

1.Place the washing machine on a flat sturdy floor, without resting it up against walls, cabinets or anything else.

2.If the floor is uneven, the front feet of the machine may be adjusted until

it reaches a horizontal position (the angle of inclination must not exceed 2 degrees).

!If the appliance is levelled correctly, it will be more stable and much less likely to cause vibrations and noise while it is operating, particularly during the spin cycle.

!If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine.

Connecting the electricity and water supplies

Connecting the water inlet hose

!Before connecting the inlet hose to the water supply, run the water until it is perfectly clear.

1. Connect the inlet hose to the machine by screwing it onto the cold water inlet of the appliance, which is situated on the top right- hand side of the rear part of the appliance (see figure).

2. Connect the inlet hose by screwing it to a cold water tap using a 3/4 gas threaded connection (see figure).

3. Make sure that the hose is not folded over or bent.

!The water pressure at the tap must fall within the values indicated in the Technical data table (see page 5).

!If the inlet hose is not long enough, contact a specialised shop or an authorised technician.

!Never use second-hand or old inlet hoses; use the products supplied with the machine.

2

Image 2
Contents Instructions for installation and use Washing MachineUnpacking and levelling InstallationConnecting the electricity and water supplies Green & Yellow Earth Blue With the following code How to connect an alternative plugAmp fuse, either in the plug or adaptor or at Technical data Description of the machine START/PAUSE button Touch control panelSelector knob Child Lock buttonModify the cycle settings Using the 90 cottons cycleSetting a delayed start Running a wash cycleWash options Wash cycles and optionsTable of wash cycles It cannot be used in conjunction with Easy IronPreparing the laundry Detergents and laundryEN Detergent Washing recommendationsLoad balancing system Precautions and tipsGeneral safety DisposalCare and maintenance Trouble shooting Problem Possible causes / SolutionsEtc. Try the programme again using a different load GuaranteeEN Assistance195092276.07 You must register your appliance with us

AQ113D 697 I specifications

The Hotpoint AQ113D 697 I is a washing machine designed to offer convenience, efficiency, and innovative cleaning technologies for modern households. With its sleek design and user-friendly interface, this model quickly gains the attention of consumers looking for reliability in laundry care.

One of the standout features of the Hotpoint AQ113D 697 I is its large capacity drum, which can handle up to 11 kilograms of laundry. This makes it an ideal choice for families or individuals who tend to do larger loads, allowing for fewer washes throughout the week. Coupled with a maximum spin speed of 1,300 RPM, it ensures that clothes come out drier, reducing the time needed for drying.

The appliance is equipped with the latest technologies that enhance its washing performance. The Intelligent Sensor technology allows the machine to detect the load size and adjust the water and energy consumption accordingly. This not only helps in conserving resources but also contributes to lower utility bills.

Additionally, the AQ113D 697 I features a variety of wash programs tailored for different types of fabrics. From delicate woolens to heavily soiled work clothes, users can select the appropriate cycle to achieve optimal cleaning results. The Rapid Wash option is particularly beneficial for busy individuals, providing quick wash cycles that can clean lightly soiled clothes in as little as 30 minutes.

Another notable characteristic is the Eco Cycle, which minimizes energy consumption and ensures an environmentally friendly washing experience. This cycle helps to maintain a balance between efficiency and performance, making it a popular choice among eco-conscious consumers.

In terms of ease of use, the Hotpoint AQ113D 697 I includes a delay timer, allowing users to schedule their washes at convenient times. The digital display provides clear information about the selected program and remaining time, making it simple to monitor progress.

Safety is also prioritized in this model, with features such as a child lock to prevent accidental settings changes. The anti-flood protection system offers peace of mind, ensuring that any risk of leaks or spills is minimized.

Overall, the Hotpoint AQ113D 697 I is a versatile washing machine that combines practicality with advanced cleaning technologies, making laundry days less of a chore and more efficient for today's busy lifestyles.