JVC SP-THBD50F, LVT2099-029A, SP-THBD50W Presetting the Radio Stations, Listening to the Radio

Presetting the Radio Stations

You can preset 50 stations for FM and AM (MW). Before tuning, make sure that you have turned down the volume.

1.Press TUNER to select FM or AM (MW).

2.Press TUNING.(-/+) to choose the station.

3.Press ENTER to memorize or clear the station.

Listening to the Radio

Preset radio stations in the unit memory first see “Presetting the radio stations”.

1.Press TUNER to select FM or AM (MW). The last received station is tuned in.

2.Press PRESET (-/+) repeatedly on the remote control to select the preset station you want. Each time you press the button, the unit tunes in one preset station at a time.

3.Adjust the volume pressing VOLUME (-/+) on the front panel or by pressing AUDIO VOL(-/+) on the remote control repeatedly.

To turn off the radio

Press 1/' to turn the unit off.

To listen to non-preset radio stations

zUse manual or automatic tuning in the step 2.

zFor manual tuning, press TUNING.(-/+) repeatedly.

zFor automatic tuning, press and hold TUNING. (-/+) for about two seconds.

To select a preset radio station directly

You can use the number buttons on the remote control to select a preset radio station directly.

For example, to listen to the preset station 4, press 4 on the remote control. To listen to the preset station 19, press 1 and then 9 (within 3 seconds).

For your reference

zIf an FM program is noisy

To appear “STEREO”, press MO./ST. Then press again this button to make “MONO” appear in the display window. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect.

zTo improve reception Reorient the supplied antennas.

38