Whirlpool W10115227B-SP, W10115226B Level Dryer, Complete Installation Checklist

Page 16

2. Move dryer to final location

2. Tighten and adjust leveling legs

Move dryer to final location. Avoid crushing or kinking vent. After dryer is in place, remove corner posts and cardboard from under the dryer.

Level Dryer

1. Level Dryer

Check levelness of dryer from side to side. Repeat from front to back.

NOTE: The dryer must be level for the moisture sensing system to operate correctly.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Not Level

 

LEVEL

 

 

 

Not Level

If dryer is not level, prop up using a wood block. Use wrench to adjust legs up or down, and check again for levelness. Once dryer is level, make sure all four legs are snug against the floor before tightening them.

Complete Installation Checklist

qCheck that all parts are now installed. If there is an extra part, go back through steps to see what was skipped.

qCheck that you have all of your tools.

qDispose of/recycle all packaging materials.

qCheck dryer’s final location. Be sure vent is not crushed or kinked.

qCheck that dryer is level. See “Level Dryer.”

qRemove film on console and any tape remaining on dryer.

qWipe dryer drum interior thoroughly with a damp cloth to remove any dust.

qRead “Dryer Use” in your “Use and Care Guide.”

qSet the dryer on a full heat cycle (not an air cycle) for 20 minutes and start the dryer.

If the dryer will not start, check the following:

■■ Controls are set in a running or “On” position. ■■ Start button has been pushed firmly.

■■ Dryer is plugged into an outlet and/or electrical supply is on.

■■ Household fuse is intact and tight, or circuit breaker has not tripped.

■■ Dryer door is closed.

qWhen the dryer has been running for 5 minutes, open the dryer door and feel for heat. If you feel heat, cancel cycle and close the door.

If you do not feel heat, turn off dryer, and check the following:

■■ There may be 2 household fuses or circuit breakers for the dryer. Check that both fuses are intact and tight, or that both circuit breakers have not tripped. If there is still no heat, contact a qualified technician.

NOTE: You may notice an odor when the dryer is first heated. This odor is common when the heating element is first used. The odor will go away.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Table of Contents Dryer Safety Tools and Parts Location RequirementsParts supplied Tools neededElectrical Requirements If connecting by direct wire Choose a standard power supply cord connectorElectrical Connection If your outlet looks like thisInstall Leveling Legs Screw in leveling legs Prepare dryer for leveling legsPower Supply Cord Direct Wire Choose electrical connection typeRemove terminal block cover Electrical Connection OptionsPower Supply Cord Connection Wire Power Supply Cord ConnectionConnect ground wire Connect remaining wires Remove center screwConnect neutral wire Connect remaining wiresDirect Wire Connection Wire Direct Wire ConnectionAttach direct wire strain relief Attach direct wire cable to strain reliefPrepare your 3-wire cable for direct connection Optional 3-wire Connection Connect external ground wireVenting Requirements Optional exhaust installations Alternate installations for close clearancesPlan Vent System Venting KitsInstall Vent System Connect VentComplete Installation Checklist Level DryerLevel Dryer If the dryer will not start, check the followingReverse Door Swing Optional Remove screws from hingesPlace towel on dryer Remove bottom screws Remove screws from doorFlip door over Attach door hingesRemove and transfer plugs Insert screws in hinge holes on dryer cabinetLift door off top screws Remove bottom screws Flip door overSeparate inner from outer door Troubleshooting Rotate outer door Remove and transfer plugsRemove door strike Remove door strike plug

W10115227B-SP, W10115226B specifications

Whirlpool has long been a trusted name in home appliances, providing quality products that make everyday tasks easier. Among its offerings, the Whirlpool W10115226B and W10115227B-SP stand out as reliable options for consumers seeking efficient and effective dishwashing solutions.

The Whirlpool W10115226B is not just another dishwasher; it is designed with multiple features that enhance user experience while ensuring thorough cleanliness. With a capacity to hold up to 14 place settings, this dishwasher is perfect for families or individuals who enjoy hosting dinner parties. The spacious interior allows for maximum load capacity without compromising on cleaning performance.

One of the standout characteristics of the W10115226B is its advanced cleaning technology. It employs a powerful wash system that includes multiple wash arms and an intelligent sensor that adjusts the wash cycle based on the load's soil level. This ensures that every dish, regardless of how tough the stains may be, receives the optimal wash cycle for a spotless finish. Additionally, its high-temperature wash option helps sanitize dishes, providing an added layer of hygiene.

The W10115227B-SP model complements its predecessor with an array of modern features. This model also boasts a user-friendly control panel that allows for seamless operation. With multiple wash cycles available, including heavy, normal, and quick wash options, users can customize the dishwashing process according to their specific needs. The energy-efficient design is another impressive attribute, featuring Energy Star certification, which not only saves users money on utility bills but also contributes to environmentally-friendly practices.

Both models include durable stainless steel interiors that resist stains and odors, ensuring longevity and a cleaner environment. The quiet operation of these dishwashers makes them ideal for open-concept homes, where noise can be a concern during wash cycles.

In conclusion, the Whirlpool W10115226B and W10115227B-SP deliver robust performance combined with user-centric technology and efficiency. Whether you are tackling daily dishwashing chores or dealing with the aftermath of a family gathering, these models are equipped to handle various tasks with ease, reflecting Whirlpool's commitment to innovation and quality in home appliances. Choosing either of these models will bring convenience and reliability into any kitchen.
Top Page Image Contents