Whirlpool W10115226B Tools and Parts, Location Requirements, Parts supplied, Tools needed

Page 3

INSTALLATION REQUIREMENTS

Tools and Parts

Parts supplied:

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed:

Flat-blade screwdriver

#2 Phillips screwdriver

 

 

 

 

 

 

Wire stripper

Tin snips

(direct wire installations)

(new vent installations)

 

 

 

 

 

 

1/4" nut driver

Vent clamps

(recommended)

 

Leveling legs (4)

Parts package is located in dryer drum. Check that all parts are included.

Parts needed:

Check local codes. Check existing electrical supply and venting, and read “Electrical Requirements” and “Venting Requirements” before purchasing parts.

Mobile home installations require metal exhaust system hardware, available for purchase from the dealer from whom you purchased your dryer. For further information, please reference the “Assistance or Service” section of the “Dryer User Instructions.”

If using a power supply cord:

Use a UL listed power supply cord kit marked for use with clothes dryers. The kit should contain:

A UL listed 30-amp power supply cord, rated 120/240 volt minimum. The cord should be type SRD or SRDT and be at least 4 ft. (1.22 m) long. The wires that connect to the dryer must end in ring terminals or spade terminals with upturned ends.

A UL listed strain relief.

Adjustable wrench that opens to 1" (25 mm) or hex-head socket wrench

Tape measure

Level

Utility knife

Pliers

Caulking gun and compound (for installing new exhaust vent)

Location Requirements

You will need:

A location allowing for proper exhaust installation. See “Venting Requirements.”

A separate 30 amp circuit.

Putty knife

3

Image 3
Contents Table of Contents Dryer Safety Tools needed Tools and PartsLocation Requirements Parts suppliedElectrical Requirements If your outlet looks like this If connecting by direct wireChoose a standard power supply cord connector Electrical ConnectionScrew in leveling legs Prepare dryer for leveling legs Install Leveling LegsElectrical Connection Options Power Supply Cord Direct WireChoose electrical connection type Remove terminal block coverWire Power Supply Cord Connection Power Supply Cord ConnectionConnect remaining wires Connect ground wireConnect remaining wires Remove center screw Connect neutral wireAttach direct wire cable to strain relief Direct Wire ConnectionWire Direct Wire Connection Attach direct wire strain reliefPrepare your 3-wire cable for direct connection Connect external ground wire Optional 3-wire ConnectionVenting Requirements Venting Kits Optional exhaust installationsAlternate installations for close clearances Plan Vent SystemConnect Vent Install Vent SystemIf the dryer will not start, check the following Complete Installation ChecklistLevel Dryer Level DryerRemove bottom screws Remove screws from door Reverse Door Swing OptionalRemove screws from hinges Place towel on dryerInsert screws in hinge holes on dryer cabinet Flip door overAttach door hinges Remove and transfer plugsRemove bottom screws Flip door over Lift door off top screwsSeparate inner from outer door Remove door strike plug TroubleshootingRotate outer door Remove and transfer plugs Remove door strike

W10115227B-SP, W10115226B specifications

Whirlpool has long been a trusted name in home appliances, providing quality products that make everyday tasks easier. Among its offerings, the Whirlpool W10115226B and W10115227B-SP stand out as reliable options for consumers seeking efficient and effective dishwashing solutions.

The Whirlpool W10115226B is not just another dishwasher; it is designed with multiple features that enhance user experience while ensuring thorough cleanliness. With a capacity to hold up to 14 place settings, this dishwasher is perfect for families or individuals who enjoy hosting dinner parties. The spacious interior allows for maximum load capacity without compromising on cleaning performance.

One of the standout characteristics of the W10115226B is its advanced cleaning technology. It employs a powerful wash system that includes multiple wash arms and an intelligent sensor that adjusts the wash cycle based on the load's soil level. This ensures that every dish, regardless of how tough the stains may be, receives the optimal wash cycle for a spotless finish. Additionally, its high-temperature wash option helps sanitize dishes, providing an added layer of hygiene.

The W10115227B-SP model complements its predecessor with an array of modern features. This model also boasts a user-friendly control panel that allows for seamless operation. With multiple wash cycles available, including heavy, normal, and quick wash options, users can customize the dishwashing process according to their specific needs. The energy-efficient design is another impressive attribute, featuring Energy Star certification, which not only saves users money on utility bills but also contributes to environmentally-friendly practices.

Both models include durable stainless steel interiors that resist stains and odors, ensuring longevity and a cleaner environment. The quiet operation of these dishwashers makes them ideal for open-concept homes, where noise can be a concern during wash cycles.

In conclusion, the Whirlpool W10115226B and W10115227B-SP deliver robust performance combined with user-centric technology and efficiency. Whether you are tackling daily dishwashing chores or dealing with the aftermath of a family gathering, these models are equipped to handle various tasks with ease, reflecting Whirlpool's commitment to innovation and quality in home appliances. Choosing either of these models will bring convenience and reliability into any kitchen.