Whirlpool W10057250 manual Reverse the strike, Reinstall the door

2.Remove hinge cover.

B

C

A

A. Door hinge

B. Plug strips

C. Hinge cover

3.Remove the 4 screws that attach to the inner door hinge and move the hinge to the other side. Reinstall the 4 screws.

A

A. Door hinge

4.Reinstall plug strips on opposite side of the inner door.

5.Check for fingerprints on the glass. Clean glass if necessary.

6.Place the inner door assembly inside the outer door assembly. To fit correctly, the inner door assembly edge fits completely inside the outer door assembly edge.

7.Reassemble the inner and outer door assemblies with the 6 screws.

Reverse the strike

1.Use a small flat-blade screwdriver to remove plug strip from the dryer door opening. Slide the head of the screwdriver under the plugs, being certain not to scratch the dryer surface. Lift up.

2.Remove the strike.

3.Insert strike and plug strip on the opposite side.

B

A

A. Plug strip (cannot be seen from this angle)

B. Door strike

Reinstall the door

1.Reattach door to dryer front panel with the 4 screws.

A

B

A. Dryer front panel

B. Door assembly

2.Check for fingerprints on the glass. Clean the glass if necessary.

3.Close door and check that it latches securely.

17