Whirlpool LE4440XW manual CaringForYourDryer, Cleaningthe lint screen, Lintscreenmaintenance

Page 9

CaringForYourDryer

Product and Fabric Damage Hazard

Do not run the dryer wlth the lint screen kose, damaged, blocked or missing. Doing so can cause overheatlng and damage to both the dryer and fabrics.

Cleaningthe lint screen

The lint screen is located under a lid on top of the dryer. Clean tt before each load. A screen blocked by lint can increase drying time.

1. Pull the lint screen straight out.

2. Roll lint off the screen with your fingers. Do not rinse or wash the screen to remove lint Wet lint is hard to remove.

3. Push the lint screen firmly back.

Lintscreenmaintenance

Laundry detergents and fabric softeners can cause a residue build-up on the lint screen. A clogged lint screen can extend drying times. Clean the lint screen every six months or more frequently if it becomes clogged due to a residue build-up. Use the following method:

1. Wet both sides of lint screen with hot water.

2. Wet a nylon brush with hot water and liquid detergent.

3. Scrub lint screen with the brush until all residue build-up is re- moved.

4. Rinse with hot water.

5. Thoroughly dry lint screen with a clean towel and .replace in dryer.

Image 9
Contents Modelmdserlal Contents Additionalsafetyinstructionsandyourresponsibilities ImportantSafetyInstructionsDryer Fire Hazard and Damage to materials can result from Always remove the door toStartingyourdryer OperatingInstructionsTo stop and restart the dryer Theregularcycles UsingAIR $ERMANENT PressFlre Hazard Operating lnstructlons Contlnud UsingTUMBLEPRESSCleaningthe lint screen LintscreenmaintenanceCaringForYourDryer Cleaningthedryer Llquld non-flammable household cleanerCaring For Your Dryer Contlnued Lintremoval Electtic dyer wlth bsck pand removedFupnd Caring For Your Dryer Contlnued See Wsrnlng,IfYouNeedServiceOrAssistance If you need FSP replacement parts’ If you are not satisfied wtth how the problem was solved’Page Whirlpool AutomaticDryerWarranty