Lint screen
Clean the lint screen before each load. A screen blocked by lint can increase drying time and may be a FIRE HAZARD.
Open the lid and pull the lint screen straight out.
DO NOT run the dryer with the lint screen loose,
damaged or missing.
0Doing so can cause over- heating, can damage fabrics and can be a FIRE HAZARD.
ROLL the lint off the s/creen with your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into place.
Lint removal
Lint can gather inside the dryer and create a fire hazard This lint
should be removed every 2 to 3 years, or more otten, depending on dryer usage.
ELECTRIC DRYERS | ” GAS DRYERS |
Cleaning should be done
0 l Avoid electrical shock hazard - unplug power supply cord or turn off
electrical power.
l Avoid injury or damage - do not put hands inside cabinet.
’ Make sure dryer is cool.
only by a qualified person.
1.Remove back panel (electric] or
front panel (gas].
2. Avoid damaging wiresther-
mostats, funnel or igniter,
3.Remove lint from shaded area - see art - with a soft brush or vacuum cleaner.
4.Replace panel; reconnect and re- level dryer.
9