Loading your Dryer, Lint Screen, Separate

loading your

Dryer 4


		For best dryrng results and energy
savings,			sort	dryer loads carefully
		Separate			loads	according		to
the type			of	fabric	and	weight	For
example
l	Dry	heavy		fabrics	(denims.		towels,
cottons)			separately		from light		fabrrcs
(permanent				press,	synthetics)
l	Separate			lent givers (towels,			sweat-
shirts, etc ) from lent takers (synthetics,
blends		permanent			press]
l Keep dark colors and light colors
separate
l	Keep	colorfast			items	away	from	non-
colorfast			fabrrcs.

Allow room for Items to tumble freely The load WIII dry faster wtth fewer wrrnkles

When dryrng permanent press,

dry smaller-than-normalloads for the best wrinkle removal

Use a mesh bag to hold small

Items such as baby socks

Read the Dryer Guide for more hints on sorting and loading

In all these cycles, the heat shuts off 5 minutes before the dryer stops tumbling. This helps cool down the load

The cool-down trme IS burlt In so the laundry will not be too hot when the dryer stops tumblrng

1 When a load of hot laundry is not tumbling, wrinkles can set In.

2.A load of hot laundry can be too hot to handle comfortably The other cycle is PERMANENT

PRESS This cycle has a longer cool-

down time at the end This extra time IS

designed to give permanent press fab-

rics the extra wrinkle protection they need

Thts Use & Core Gude contains suggestions on the way to use your dryer to get the best results and longest useful life from Your dryer Please read It carefullv

lint Screen

The lint screen IS under the Ird on top of the dryer

C/eon the hnt screen before each ioad A screen that’s blocked by lint can cause longer drying times

Understanding your Dryer

Your dryer has five cycles The EXTRA HEAVY. HEAVY, MEDIUM and LIGHT Cycles are designed to tumble laundry for a certain length of

time. .dependrng on the load You

select the drying temperature you want

To remove the screen. open the IId and pull the screen straight out. Roll the lint off the screen with your fingers DO NOT rinse the screen or wash

it. Wet lint IS hard to remove

When replacing the screen, push it firmly into place Close the IId