Whirlpool 3406449 installation instructions These, Before you start, Parts supplied

Page 1

COIII--AIIIIIt:fcial 27”

Electronic Dryer

1M PORTANT:

Important:

Read

and

Read these instructions before you start to

install the dryer.

save

these

Save Installation Instructions for local

electrical inspector’s use.

 

 

Part No. 3406449 instructions.

Keep Installation Instructions for future

reference.

 

Your safety and the safety of others is very important.

Ne have provided many important safety messages in this manual and In your appliance. Always read and 3bey all safety messages.

q! This is the safety alert symbol. This symbol alerts you to hazards that can kill

3r hurt you and others. All safety messages will be preceded by the safety alert symbol and the word “DANGER” or “WARNING”. These words mean:

You &l be killed or seriously injured if you don’t follow instructions.

Before you start...

Check location where dryer will be used. Proper installation is your responsibility The dryer must not be installed or stored in an area where it will be exposed to water and/or weather. Make sure you hove everything necessary for correct installation.

The dryer is equipped with an electronic control timer, selector switches and indicator lights. The timer is set to provide 45 minutes of drying time when activated.

Tools needed for instaIIation:

odiustable wrench solely glasses

utility knifelevel

Phillips screwdriver pliers flat-blade screwdriver duct tape gloves

Parts supplied:

4 leveling legs

Parts owner must supply:

For electronic system support (cards and additional electronic features), contact:

IntelliCard Systems Ltd.

1520 Neptune Dr. Boynton Beach, FL 33426

You can be killed or seriously injured if you don’t follow instructions.

All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

Explosion

Hazard

(407) 369-3435

 

Keep flammable materials and vapors away from dryer.

Place dryer at least 18 inches above the floor for a garage installation.

Failure to do so can result in death, explosion, fire, or burns.

It is the customer’s responsibility:

-To contact a qualified electrical installer.

-To have dryers installed according to al national and local codes and

ordinances.a-w

Image 1
Contents Before you start TheseParts supplied Parts owner must supplyMetal flexible vent must be fully AafTo connect exhaust vent straight out the back Exhaust vent connectionRecommended Ground Method Electrical requirementsWith dryer in laundry area Now startZq$ 9l Power supply cordElectrical connection Outside dryer Electrical Shock Hazard 314Now start Recessed area and closet installation instructjrons Product dimensionsIf dryer does not Operate Moving the dryer To a new locationIf you need Assistance