Using the spray-button

The burst function can be also used when the iron is held in vertical position to remove creases from hanging clothes, curtains, etc.

Provided there is sufficient water in the tank , you can use the spray button at any temperature setting and when steam or dry ironing. While ironing, press the button several times to acti- vate the pump.

Anti-scale system

The integrated anti-scale system reduces the build up of lime scale and increases the user life of your iron

KH2400

Using the calc clean button

It is important to use the Calc-Clean function before putting the iron into operation for the first time and then at regular intervals in order to remove lime particles and other impurities. We recommend that the Calc-Clean function is used at least twice a month. In areas with very hard water, the iron should be cleaned with the Calc-Clean function after every use, or use distilled water.

• Fill the water up to “MAX” line in water tank .

• Insert the plug into the wall socket.

• Set the temperature control to MAX.

• Allow the iron to heat up until the heating light goes out and then lights again.

•Remove the plug from the wall socket.

•Hold the iron horizontally over the sink.

•	Set the steam control gear		to calc
	clean position (0) then press and hold
	the calc clean button	. The boiling
	water and steam will drain from the
	vents in the soleplate	. Impurities
	and scale will be drained away with
	the water.
• Move the iron backwards and for-
	wards while draining the water.
•	Release the calc clean button		once
	all water has been drained out.

•Place the iron in the upright position, plug it and then allow it to heat up.

• Carefully dry soleplate by ironing over a towel or old cloth to ensure there is no remainder of the water inside the steam chamber.

•Let the iron cool down completely before storing it.

- 9 -