Step 3: Attach the SWITCH BOX (#15) to the TANK (#1) using two SCREWS (#20), WASHERS (#21), LOCK WASHERS (#22), and NUTS (#23) as shown in Figure 3.
Ground
Wires
Lock
Washer
(#22)
Nut (#23)
Black Wire
(from Pump)
White Wire
(from Pump)
Switch Box (#15)
Power Cord (#17)
Screw
(#20)
Washer
(#21)
Figure 3 — Attaching the Switch Box to Tank
Step 4: When attaching the right side of the SWITCH BOX, make sure the SCREW also secures the side of the CORD CLAMP that was left unattached in Step 3, above.
SKU 35740 | For technical questions, please call | Page 8 |