Miele W 4840 installation instructions Cleaning the water inlet filters

Page 34

Cleaning and care

Cleaning the water inlet filters

The washer has two water inlet filters to protect each inlet valve. These filters should be checked and cleaned if necessary every 6 months. This may need to be done more frequently with some water supplies.

^ Turn off the water supply.

^ Unscrew the inlet hose from the valve
by turning the connector counter-
clockwise using a wrench if
clockwise using a wrench if
necessary.	^ Remove the rubber seal, 1, from the
		connector.
	^ Using needle nose pliers, grasp the
		plastic filter, 2, and pull it out of the
		hose connector.
	^ Clean the filter under running water
		and carefully remove any large
		particles.
	^ Replace the filter and seal then
		reconnect the hose.
	^ Slowly turn on the valve and check
		for leaks. If water leaks, tighten the
		bolt.


		Both filters must be put back in
		place after cleaning.

30

Image 34

Contents Operating and Installation Instructions Washer 4840 Contents Contents Important Safety Instructions Save These Instructions UseGuide to the washer Control panelDisplay function Selection and display of program settingsProgram selection using the display Menu buttonsShipping strut reminder Before using for the first timeSetting the display language Starting the first wash programPretreat stains Using the washerPrepare and sort the laundry Sort the laundry General tipsLoad the laundry Comforter loaded correctly Loading a comforterComforter loaded incorrectly Select a temperature and/or spin speed Select a programProgram guide Cold Slow spin Temperature Final spin Item / Tip WoolensSilk CustomDress shirts Temperatures Final spin Item / Tip DelicatesDenim/Jeans Warm Med spinExpress Temperature Final spin Item / Tip Beach towelsNo Heat Max spin Drain / SpinHold Final spin speedRinse spin No spin Deselect rinse spin and final spinExtended Adjusting the buzzer volumeSelect an option SensitiveAdd detergent Bleach Main washHeavy Soil SoftenerDetergents Universal Color Delicate BleachFabric after care Cancel Select Delay Start if desiredAdjust Start the program Activate the Child Lock If desired Deactivate the Child LockProgram end Adjusting the spin speed Canceling a programAdjusting the temperature Adjusting the optionsQuick guide Remove this guide for easy referenceSort the laundry Select a temperatureQuick guide Load the laundryStart a program Add detergent Select Delay Start if desiredSelect an Option Activate the Child Lock if desiredSelectable Options except for buzzer Adding/removing laundry during a wash program Drum door cannot be opened ifCleaning the drum Cleaning and CareCleaning the exterior and control panel Desclaing the washerCleaning the detergent drawer Siphon tube and channelCleaning the water inlet filters Frequently asked questions Wash program cannot be startedDisplay shows a fault message Issue Possible fault FixGeneral problems with the washer Unsatisfactory wash results Frequently asked questions Drum door cannot be openedFrequently asked questions Opening the drum door Pull out the detergent drawerOptional accessories After sales servicePC Update RepairsInstallation Instructions Installation Front viewRear view Installation Installation siteDo not lift the washer by the drum door Removing the shipping struts Adjust the four leveling feet Leveling the washerHose extension optional accessory PlumbingDo not connect the washer to hot water only Water connectionTips for a hot water connection Drainage Electrical connection Setting the display language Disposal of the packing material Help protect our environmentDisposal of an appliance