Miele W 4840 installation instructions Display shows a fault message, Issue Possible fault Fix

Page 36

Frequently asked questions

The display shows a fault message

Issue	Possible fault		Fix 1)
q Drain fault	– The drain is	–	Clean the drain filter and
Check drain	blocked.		the drain pump.
	blocked.		the drain pump.
	– The drain hose is too	–	The maximum drain
	high.		pump height is 3 ft (1m).

p Water inlet fault	– The water intake is	Possible fault:
Open water faucet	blocked.	– check if the water supply
	blocked.	– check if the water supply
			is open all the way.
		–	the inlet hose is kinked.

o Waterproof system	The waterproof system	Call Technical Service.
activated	has activated.
	has activated.

, Technical fault	There is a fault.	Restart the program.
Call Technical Service		If the fault message
		If the fault message
		appears again contact
		Technical Service.

In the display flashes	The machine has	Use less detergent in the
Anti-crease	oversudsed.	next wash program, and
alternating with		follow the recommended
Check detergent		amount on the detergent
		packaging.

1) To turn off the fault message:

^To turn the fault message off: Open the drum door or press the "Pause" button until the fault message goes out.

32

Image 36

Contents Operating and Installation Instructions Washer 4840 Contents Contents Important Safety Instructions Save These Instructions UseGuide to the washer Control panelSelection and display of program settings Program selection using the displayDisplay function Menu buttonsBefore using for the first time Setting the display languageShipping strut reminder Starting the first wash programUsing the washer Prepare and sort the laundry Sort the laundryPretreat stains General tipsLoad the laundry Loading a comforter Comforter loaded correctlyComforter loaded incorrectly Select a temperature and/or spin speed Select a programProgram guide Temperature Final spin Item / Tip Woolens SilkCold Slow spin CustomTemperatures Final spin Item / Tip Delicates Denim/JeansDress shirts Warm Med spinTemperature Final spin Item / Tip Beach towels No Heat Max spinExpress Drain / SpinFinal spin speed Rinse spinHold No spin Deselect rinse spin and final spinAdjusting the buzzer volume Select an optionExtended SensitiveAdd detergent Main wash Heavy SoilBleach SoftenerDetergents Universal Color Delicate BleachFabric after care Select Delay Start if desired CancelAdjust Start the program Activate the Child Lock If desired Deactivate the Child LockProgram end Canceling a program Adjusting the temperatureAdjusting the spin speed Adjusting the optionsQuick guide Remove this guide for easy referenceSelect a temperature Quick guideSort the laundry Load the laundryAdd detergent Select Delay Start if desired Select an OptionStart a program Activate the Child Lock if desiredSelectable Options except for buzzer Adding/removing laundry during a wash program Drum door cannot be opened ifCleaning and Care Cleaning the exterior and control panelCleaning the drum Desclaing the washerCleaning the detergent drawer Siphon tube and channelCleaning the water inlet filters Frequently asked questions Wash program cannot be startedDisplay shows a fault message Issue Possible fault FixGeneral problems with the washer Unsatisfactory wash results Frequently asked questions Drum door cannot be openedFrequently asked questions Opening the drum door Pull out the detergent drawerAfter sales service PC UpdateOptional accessories RepairsInstallation Instructions Installation Front viewRear view Installation site InstallationDo not lift the washer by the drum door Removing the shipping struts Adjust the four leveling feet Leveling the washerHose extension optional accessory PlumbingWater connection Do not connect the washer to hot water onlyTips for a hot water connection Drainage Electrical connection Setting the display language Help protect our environment Disposal of the packing materialDisposal of an appliance