Miele T 1405, T1405 What if the dryer will not run?, How do I prevent static cling?

	Frequently asked questions
What if the dryer will not run?
Possible fault	Fix
The "Start/Stop T" button was not	Make sure the dryer is on. Press the "Start/
pressed.	Stop T" button to begin the drying program.
The circuit breaker tripped or the	Make sure the dryer is plugged in or reset
dryer is unplugged.	the circuit breaker.
The door is not closed.	Close the door properly.

How do I prevent static cling?

Add fabric softener to laundry when washing or select the "Less Dry" setting on the dryer.

What if the drum light does not come on?

Possible fault Fix

The bulb may be bad or burned See "Changing the light bulb." out.

What if the "Child Lock" indicator flashes after turning the dryer on and a program cannot be started?

Possible fault	Fix
The child lock is activated.	Deactivate the child lock. See "Child Lock."

What if the program stops, the "Anti-crease / End" indicator lights and the buzzer sounds?

Possible fault	Fix
The drum is empty.	Load laundry into the dryer. The dryer will not
	operate when the drum is empty. Single
	items should be dried with "Sturdy" or a
	timed program and dry items in the "Fluff"
	program.
What if the "Filter/Vent" fault indicator is lit?
Possible fault	Fix
The lint filter is clogged.	Clean the lint filters. See "Dryer care".
The exhaust hose or the	Remove lint and check the exhaust system
connection is clogged with lint.	for blockages.
The air supply in the room is	Open a window or door to increase airflow.
insufficient.

17